Latest Standards RSS Feed

ANSI/AAMI/ISO 10993-9:2009

Biological evaluation of medical devices - Part 9:Framework for identification and quantification of potential degradation products

ANSI/AAMI/ISO 10993-16:2010

Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables

ANSI/AAMI HE74 HE75 HUMAN FACTOR SET

ANSI/AAMI HE74 HE75 Human Factor Set

AIAG MSA-4:2010

Measurement Systems Analysis (MSA), Reference Manual Fourth Edition

ANSI/ASA S1.18-2010

American National Standard Method for Determining the Acoustic Impedance of Ground Surfaces (with associated computer application ZIP file)

ASC X9 TR-37-2010

Technical Report Migration from DES

X9.100-170-2010

Check Fraud Deterrent Icon

X9.100-151-2010

Check Correction Strips

ASME B30.20-2010

Below-the-Hook Lifting Devices - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings

ASME B31.8-2010

Gas Transmission and Distribution Piping Systems

ASME B31.8S-2010

Managing System Integrity of Gas Pipelines ASME Code for Pressure Piping, B31 (Supplement to ASME B31.8)

ASME B31T-2010

Standard Toughness Requirements for Piping

ASME QAI-1-2010

Qualifications for Authorized Inspection

ASME QEI-1-2010

Standard for the Qualification of Elevator Inspectors

ASTM E518/E518M-10

Standard Test Methods for Flexural Bond Strength of Masonry

ASTM E519/E519M-10

Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

ASTM C1088-10

Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

ASTM C1227-10a

Standard Specification for Precast Concrete Septic Tanks

ASTM C1262-10

Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

ASTM C1272-10

Standard Specification for Heavy Vehicular Paving Brick

ASTM C1314-10

Standard Test Method for Compressive Strength of Masonry Prisms

ASTM C140-10

Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

ASTM C1405-10

Standard Specification for Glazed Brick (Single Fired, Brick Units)

ASTM C1660-10

Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry

ASTM C1714/C1714M-10

Standard Specification for Preblended Dry Mortar Mix for Unit Masonry

ASTM C212-10

Standard Specification for Structural Clay Facing Tile

ASTM C216-10

Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

ASTM C270-10

Standard Specification for Mortar for Unit Masonry

ASTM C279-10

Standard Specification for Chemical-Resistant Masonry Units

ASTM C34-10

Standard Specification for Structural Clay Load-Bearing Wall Tile

ASTM C530-10

Standard Specification for Structural Clay Nonloadbearing Screen Tile

ASTM C56-10

Standard Specification for Structural Clay Nonloadbearing Tile

ASTM C652-10

Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

ASTM C1077-10b

Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation

ASTM C1232-10b

Standard Terminology of Masonry

ASTM C457/C457M-10a

Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

ASTM D5229/D5229M-92(2010)

Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

ASTM D7011-10

Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

ASTM D7583-09

Standard Test Method for John Deere Coolant Cavitation Test

ASTM F1869-10

Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

ASTM D6928-10

Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

ASTM D7384-10

Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary

ASTM D7405-10a

Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

ASTM D7443-10

Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents

ASTM D7460-10

Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

ASTM D7608-10

Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

ASTM D7625-10

Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method

ASTM D7627-10

Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine

ASTM D7628-10

Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas

ASTM D7629/D7629M-10

Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features

ASTM D7630/D7630M-10

Standard Practice for Minimum Geospatial Data for Postmining Land Uses

ASTM D7631-10

Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location

ASTM E1124-10

Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method

ASTM E1333-10

Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

ASTM E1353-08ae1

Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

ASTM E2749-10

Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

ASTM E2759-10

Standard Practice for Highway Traffic Monitoring Truth-in-Data

ASTM F1057-10

Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

ASTM F1807-10e1

Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

ASTM C1303/C1303M-10

Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

ASTM C1340/C1340M-10

Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

ASTM C303-10

Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation

ASTM C473-10

Standard Test Methods for Physical Testing of Gypsum Panel Products

ASTM C585-10

Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

ASTM C612-10

Standard Specification for Mineral Fiber Block and Board Thermal Insulation

ASTM C793-05(2010)

Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

ASTM D2027/D2027M-10

Standard Specification for Cutback Asphalt (Medium-Curing Type)

ASTM D2028/D2028M-10

Standard Specification for Cutback Asphalt (Rapid-Curing Type)

ASTM D2202-00(2010)

Standard Test Method for Slump of Sealants

ASTM D2726-10

Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

ASTM D4933-99(2010)

Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials

ASTM D5893/D5893M-10

Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

ASTM D6067-10

Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization

ASTM D6570-04(2010)

Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber

ASTM D7115-10

Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

ASTM C1249-06a(2010)

Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

ASTM C634-10

Standard Terminology Relating to Building and Environmental Acoustics

ASTM D3018/D3018M-10

Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

ASTM D7505/D7505M-10

Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

ASTM E1602-03(2010)e1

Standard Guide for Construction of Solid Fuel Burning Masonry Heaters

ASTM E1663-03(2010)

Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology

ASTM E917-05(2010)

Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems

ASTM G90-10

Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight

ASTM G29-96(2010)

Standard Practice for Determining Algal Resistance of Plastic Films

ASTM F2771-10

Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions

ASTM F1662-10

Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch

ASTM F1895-10

Practice for Submersion of a Membrane Switch

ASTM F1896-10

Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

ASTM F2357-10

Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader

ASTM F996-10

Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics

ASTM D2864-10

Standard Terminology Relating to Electrical Insulating Liquids and Gases

ASTM D4059-00(2010)

Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

ASTM F2398-10

Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat

ASTM F2797-10

Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners

ASTM F2810-10

Standard Specification for Elliptical Trainers

ASTM D7584-10

Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber

ASTM F1169-10

Standard Consumer Safety Specification for Full-Size Baby Cribs

ASTM F2201-10

Standard Consumer Safety Specification for Utility Lighters

ASTM F2219-10

Standard Test Methods for Measuring High-Speed Bat Performance

ASTM F2811-10

Standard Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers

ASTM F2834-10

Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing

ASTM F2843-10

Standard Specification for Condition 0 Bicycle Frames

ASTM F2845-10

Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs

ASTM F400-10

Standard Consumer Safety Specification for Lighters

ASTM F406-10

Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards

ASTM F1004-10

Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures

ASTM F2085-10

Standard Consumer Safety Specification for Portable Bed Rails

ASTM F2835-10

Standard Specification for Underfired Broilers

ASTM F2844-10

Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels

ASTM C1022-05(2010)

Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate

ASTM C1431-99(2010)e1

Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal

ASTM C1457-00(2010)e1

Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction

ASTM C1475-05(2010)e1

Standard Guide for Determination of Neptunium-237 in Soil

ASTM C1615-10

Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities

ASTM C998-05(2010)e1

Standard Practice for Sampling Surface Soil for Radionuclides

ASTM C999-05(2010)e1

Standard Practice for Soil Sample Preparation for the Determination of Radionuclides

ASTM C1284-10

Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry

ASTM C697-10

Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets

ASTM C698-10

Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)

ASTM C759-10

Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions

ASTM D7035-10

Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

ASTM E1688-10

Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates

ASTM D5744-07e1

Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

ASTM D6327-10

Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter

ASTM D6333-10

Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors

ASTM D6345-10

Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

ASTM D6399-10

Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

ASTM D6640-01(2010)

Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

ASTM D4298-04(2010)

Standard Guide for Intercomparing Permeation Tubes to Establish Traceability

ASTM D6589-05(2010)e1

Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance

ASTM D6696-10

Standard Guide for Understanding Cyanide Species

ASTM D7145-05(2010)e1

Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means

ASTM E1652-10

Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples

ASTM E1750-10

Standard Guide for Use of Water Triple Point Cells

ASTM E2123-10

Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation

ASTM E2758-10

Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers

ASTM E1402-08e1

Standard Terminology Relating to Sampling

ASTM E1588-10e1

Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry

ASTM F2429-05(2010)

Standard Terminology Relating to Aerospace Transparent Materials and Enclosures

ASTM F2446-04(2010)

Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange

ASTM F2469-10

Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method

ASTM F1018-87a(2010)

Standard Specification for Steel Emergency Gear Stowage Locker

ASTM F1092-04(2010)

Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

ASTM F1120-87(2010)

Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

ASTM F1165-10

Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

ASTM F1201-88(2010)

Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

ASTM F1386-92(2010)

Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

ASTM F1431-92(2010)

Standard Specification for Water Trap for Diesel Exhaust

ASTM F1433-97(2010)

Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner

ASTM F1508-96(2010)

Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

ASTM F1792-97(2010)

Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

ASTM F1793-97(2010)

Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service

ASTM F1794-97(2010)

Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems

ASTM F1863-10

Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts

ASTM F1864-05(2010)

Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings

ASTM F320-10

Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

ASTM F330-10

Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

ASTM F520-10

Standard Test Method for Environmental Resistance of Aerospace Transparencies

ASTM F521-83(2010)

Standard Test Methods for Bond Integrity of Transparent Laminates

ASTM F987-04(2010)

Standard Specification for Portable Intermediate Flush Deck Stanchion

ASTM F1078-10

Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades

ASTM F1840-10

Standard Terminology for Surgical Suture Needles

ASTM F1903-10

Standard Practice for Testing for Biological Responses to Particles In Vitro

ASTM F2024-10

Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings

ASTM F2259-10

Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (¹H NMR) Spectroscopy

ASTM F2312-10

Standard Terminology Relating to Tissue Engineered Medical Products

ASTM F2315-10

Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels

ASTM F921-10

Standard Terminology Relating to Hemostatic Forceps

ASTM F2381-10

Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

ASTM F2848-10

Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns

ASTM F366-10

Standard Specification for Fixation Pins and Wires

ASTM F432-10

Standard Specification for Roof and Rock Bolts and Accessories

ASTM F468-10

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

ASTM F879-10

Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

ASTM A1014/A1014M-10

Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

ASTM A1031/A1031M-10

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

ASTM A1038-10

Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

ASTM A105/A105M-10

Standard Specification for Carbon Steel Forgings for Piping Applications

ASTM A1062-10

Standard Specification for Steel Castings Sampling

ASTM A182/A182M-10

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

ASTM A193/A193M-10a

Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A217/A217M-10

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A231/A231M-10

Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

ASTM A234/A234M-10

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A297/A297M-10

Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

ASTM A320/A320M-10

Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

ASTM A335/A335M-10a

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

ASTM A336/A336M-10

Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

ASTM A369/A369M-10

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

ASTM A401/A401M-10

Standard Specification for Steel Wire, Chromium-Silicon Alloy

ASTM A403/A403M-10

Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A420/A420M-10

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A428/A428M-10

Standard Test Method for Weight Mass of Coating on Aluminum-Coated Iron or Steel Articles

ASTM A437/A437M-10a

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

ASTM A449-07be1

Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

ASTM A450/A450M-10

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

ASTM A479/A479M-10a

Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

ASTM A484/A484M-10

Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

ASTM A684/A684M-10

Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

ASTM A688/A688M-10

Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes

ASTM A744/A744M-10

Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

ASTM A789/A789M-10

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

ASTM A803/A803M-10

Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes

ASTM A815/A815M-10

Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

ASTM A858/A858M-10

Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

ASTM A955/A955M-10

Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

ASTM A962/A962M-10

Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

ASTM B294-10

Standard Test Method for Hardness Testing of Cemented Carbides

ASTM B308/B308M-10

Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

ASTM B316/B316M-10

Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

ASTM B540-97(2008)e1

Standard Specification for Palladium Electrical Contact Alloy

ASTM B547/B547M-10

Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

ASTM B565-04(2010)

Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

ASTM B652/B652M-10

Standard Specification for Niobium-Hafnium Alloy Ingots

ASTM B654/B654M-10

Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

ASTM B655/B655M-10

Standard Specification for Niobium-Hafnium Alloy Bar and Wire

ASTM B822-10

Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

ASTM B922-10

Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

ASTM B923-10

Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

ASTM B966-10

Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas

ASTM A1018/A1018M-10

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

ASTM A941-10a

Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

ASTM B387-10

Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

ASTM E194-10

Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

ASTM E10-10

Standard Test Method for Brinell Hardness of Metallic Materials

ASTM E2368-10

Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

ASTM E2737-10

Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

ASTM E2760-10

Standard Test Method for Creep-Fatigue Crack Growth Testing

ASTM E4-10

Standard Practices for Force Verification of Testing Machines

ASTM E1736-10

Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

ASTM E2191/E2191M-10

Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

ASTM E2698-10

Standard Practice for Radiological Examination Using Digital Detector Arrays

ASTM E273-10

Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

ASTM E664/E664M-10

Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

ASTM E83-10a

Standard Practice for Verification and Classification of Extensometer Systems

ASTM D7639-10

Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

ASTM D817-96(2010)

Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

ASTM D871-96(2010)

Standard Test Methods of Testing Cellulose Acetate

ASTM E2630-08e1

Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source

ASTM D1065-96(2010)

Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products

ASTM D1544-04(2010)

Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

ASTM D2350-90(2010)

Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints

ASTM D2351-90(2010)

Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints

ASTM D2352-85(2010)

Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints

ASTM D2372-85(2010)

Standard Practice for Separation of Vehicle From Solvent-Reducible Paints

ASTM D3450-00(2010)

Standard Test Method for Washability Properties of Interior Architectural Coatings

ASTM D3624-85a(2010)

Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy

ASTM D3717-85a(2010)

Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy

ASTM D3718-85a(2010)

Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

ASTM D3971-89(2010)

Standard Test Method for Dichloromethane-Soluble Matter in Cellulose

ASTM D4584-05(2010)

Standard Test Method for Measuring Apparent pH of Electrocoat Baths

ASTM D464-05(2010)

Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products

ASTM D465-05(2010)

Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products

ASTM D5146-10

Standard Guide to Testing Solvent-Borne Architectural Coatings

ASTM D5768-02(2010)

Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

ASTM D5974-00(2010)

Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

ASTM D3359-09e2

Standard Test Methods for Measuring Adhesion by Tape Test

ASTM D4146-10

Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

ASTM D4838-88(2010)

Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

ASTM D5383-02(2010)

Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

ASTM D5398-97(2010)

Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

ASTM D5590-00(2010)

Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

ASTM D5723-95(2010)

Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence

ASTM D5796-03(2010)

Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device

ASTM D6387-99(2010)e1

Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

ASTM D3078-02(2008)e1

Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission

ASTM D3330/D3330M-04(2010)

Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

ASTM D6794-10

Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time

ASTM D6795-10

Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time

ASTM D6891-10

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

ASTM D6894-10

Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

ASTM D6984-10

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

ASTM D7320-10

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

ASTM D7422-10

Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

ASTM D7430-10a

Standard Practice for Mechanical Sampling of Coal

ASTM D7468-10

Standard Test Method for Cummins ISM Test

ASTM D7484-10a

Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

ASTM D7527-10

Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

ASTM D7582-10

Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis

ASTM D7603-10

Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

ASTM E2412-10

Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

ASTM D1025-10

Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene

ASTM D1070-03(2010)

Standard Test Methods for Relative Density of Gaseous Fuels

ASTM D1319-10

Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

ASTM D1321-10

Standard Test Method for Needle Penetration of Petroleum Waxes

ASTM D1403-10

Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

ASTM D1465-10

Standard Test Method for Blocking and Picking Points of Petroleum Wax

ASTM D1743-10

Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

ASTM D1826-94(2010)

Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

ASTM D217-10

Standard Test Methods for Cone Penetration of Lubricating Grease

ASTM D2269-10

Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

ASTM D2596-10

Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

ASTM D2711-10

Standard Test Method for Demulsibility Characteristics of Lubricating Oils

ASTM D409/D409M-09ae1

Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method

ASTM D4170-10

Standard Test Method for Fretting Wear Protection by Lubricating Greases

ASTM D4423-10

Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons

ASTM D4784-93(2010)

Standard for LNG Density Calculation Models

ASTM D4863-10

Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

ASTM D5579-10

Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

ASTM D5662-10

Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

ASTM D6299-10

Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

ASTM D6557-10

Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

ASTM D6593-10

Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

ASTM D6618-10

Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

ASTM D7156-10

Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

ASTM D720-91(2010)

Standard Test Method for Free-Swelling Index of Coal

ASTM D7216-10

Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

ASTM D4239-10

Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods

ASTM D5865-10a

Standard Test Method for Gross Calorific Value of Coal and Coke

ASTM D731-10

Standard Test Method for Molding Index of Thermosetting Molding Powder

ASTM D882-10

Standard Test Method for Tensile Properties of Thin Plastic Sheeting

ASTM D952-10

Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

ASTM D953-10

Standard Test Method for Bearing Strength of Plastics

ASTM D1043-10

Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

ASTM D2103-10

Standard Specification for Polyethylene Film and Sheeting

ASTM D2463-10a

Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

ASTM D256-10

Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

ASTM D3299-10

Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

ASTM D3576-04(2010)

Standard Test Method for Cell Size of Rigid Cellular Plastics

ASTM D4385-10

Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

ASTM D4508-10

Standard Test Method for Chip Impact Strength of Plastics

ASTM D5155-10

Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates

ASTM D5998-10

Standard Specification for Molded Polyethylene Shipping and Storage Drums

ASTM D638-10

Standard Test Method for Tensile Properties of Plastics

ASTM D7191-10

Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

ASTM D7633-10

Standard Test Method for Carbon BlackCARBON CONTENT

ASTM D5712-10

Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method

ASTM D6740-10

Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

ASTM D6741-10

Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

ASTM D6843-10

Standard Test Method for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

ASTM D6844-10

Standard Test Method for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

ASTM D6909-10

Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

ASTM D7102-10

Standard Guide for Determination of Endotoxin on Sterile Medical Gloves

ASTM E1136-10

Standard Specification for P195/75R14 Radial Standard Reference Test Tire

ASTM F2466-10

Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

ASTM F2838-10

Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation

ASTM E1687-10

Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids

ASTM F1797-09e1

Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks

ASTM F2209-10

Standard Guide for Training of Level I Land Search Team Member

ASTM F2821-10

Standard Test Methods for Basket Type Rescue Litters

ASTM D7076-09e1

Standard Test Method for Measurement of Shives in Retted Flax

ASTM D7571-10

Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame

ASTM D204-02(2010)

Standard Test Methods for Sewing Threads

ASTM F2454-05(2010)

Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting

ASTM F2506-10

Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers

ASTM F2350-04(2010)

Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems

ASTM F2245-10

Standard Specification for Design and Performance of a Light Sport Airplane

ASTM F2304-10

Standard Practice for Sealing of Sewers Using Chemical Grouting

ANSI O5. Wood Poles and Products Package

ATIS-0300101

IPTV Ordering Framework

ATIS-0600023

Guidance for the Use of Updtream Power Back Off Parameters for ITU-T Recommendation G.993.2 Annex A

ATIS-0600337.2010pre-pub

Requirements for Maximum Voltage, Current, and Power Levels in Network-Powered Transport Systems

ATIS-0600338.2010pre-pub

Electrical Coordination of Primary and Secondary Surge Protection for Use in Telecommunications Circuits

ANSI/BHMA A156.9-2010

Cabinet Hardware

BS EN 74-3:2007

Couplers, spigot pins and baseplates for use in falsework and scaffolds. Plain base plates and spigot pins. Requirements and test procedures

BS EN 746-2:2010

Industrial thermoprocessing equipment. Safety requirements for combustion and fuel handling systems

BS EN ISO 11953:2010

Dentistry. Implants. Clinical performance of hand torque instruments

BS EN ISO 17672:2010

Brazing. Filler metals

BS EN ISO 28319:2010

Dentistry. Laser welding

BS EN ISO 6179:2010

Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)

BS EN ISO 9173-2:2010

Dentistry. Extraction forceps. Designation

BS ISO 10298:2010

Determination of toxicity of a gas or gas mixture

BS ISO 11089:2010

Rubber, raw synthetic. Determination of antidegradants by high-performance liquid chromatography

BS ISO 15622:2010

Intelligent transport systems. Adaptive cruise control systems. Performance requirements and test procedures

BS ISO 17386:2010

Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures

BS ISO 22840:2010

Intelligent transport systems. Devices to aid reverse manoeuvres. Extended-range backing aid systems (ERBA)

BS ISO 23519:2010

Sintered metal materials, excluding hardmetals. Measurement of surface roughness

BS ISO 25119-1:2010

Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. General principles for design and development

BS ISO 25119-2:2010

Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Concept phase

BS ISO 25119-3:2010

Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Series development, hardware and software

BS ISO 25119-4:2010

Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Production, operation, modification and supporting processes

BS ISO 27875:2010

Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages

BS ISO 28641:2010

Rubber compounding ingredients. Organic chemicals. General test methods

BS ISO 29301:2010

Microbeam analysis. Analytical transmission electron microscopy. Methods for calibrating image magnification by using reference materials having periodic structures

BS ISO 29621:2010

Cosmetics. Microbiology. Guidelines for the risk assessment and identification of microbiologically low-risk products

BS ISO 8820-3:2010

Road vehicles. Fuselinks. Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)

BS ISO/IEC 15420:2009

Information technology. Automatic identification and data capture techniques. EAN/UPC bar code symbology specification

BS 5335-1:1991+A2:2010

Continental quilts. Specification for quilts containing fillings other than feather and/or down

BS 8525-1:2010

Greywater systems. Code of practice

BS EN 1106:2010

Manually operated taps for gas burning appliances

BS EN 12568:2010

Foot and leg protectors. Requirements and test methods for toecaps and penetration resistant inserts

BS EN 13000:2010

Cranes. Mobile cranes

BS EN 15650:2010

Ventilation for buildings. Fire dampers

BS EN 15723:2010

Railway applications. Closing and locking devices for payload protecting devices against environmental influences. Requirements for durability, operation, indication, maintenance, recycling

BS EN 15853:2010

Ambient air quality. Standard method for the determination of mercury deposition

BS EN 15900:2010

Energy efficiency services. Definitions and requirements

BS EN 60191-6-19:2010

Mechanical standardization of semiconductor devices. Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage

BS EN 62282-6-300:2009

Fuel cell technologies. Micro fuel cell power systems. Fuel cartridge interchangeability

BS EN 1010-3:2002+A1:2009

Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines

BS EN 1010-4:2004+A1:2009

Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines

BS EN 1014-1:2010

Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for sampling creosote

BS EN 1014-2:2010

Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis

BS EN 1014-3:2010

Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the benzo(a)pyrene content of creosote

BS EN 1014-4:2010

Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the water-extractable phenols content of creosote

BS EN 1034-13:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Machines for de-wiring bales and units

BS EN 1034-14:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Reel splitter

BS EN 1034-2:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Barking drums

BS EN 1034-22:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Wood grinders

BS EN 1034-3:1999+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Winders and slitters, plying machines

BS EN 1034-4:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Pulpers and their loading facilities

BS EN 1034-5:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Sheeters

BS EN 1034-6:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Calender

BS EN 1034-7:2005+A1:2009

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Chests

BS EN 14151:2010

Geosynthetics. Determination of burst strength

BS EN 14490:2010

Execution of special geotechnical works. Soil nailing

BS EN 14635:2010

Glass packaging. 26 H 126 crown finish. Dimensions

BS EN 15416-3:2007+A1:2010

Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Creep deformation test at cyclic climate conditions with specimens loaded in bending shear

BS EN 15823:2010

Packaging. Braille on packaging for medicinal products

BS EN 3-10:2009

Portable fire extinguishers. Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7

BS EN 50206-2:2010

Railway applications. Rolling stock. Pantographs. Characteristics and tests. Pantographs for metros and light rail vehicles

BS EN 55016-1-4:2010

Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements

BS EN 60034-2-2:2010

Rotating electrical machines. Specific methods for determining separate losses of large machines from tests. Supplement to IEC 60034-2-1

BS EN 60068-2-53:2010

Environmental testing. Tests and guidance. Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

BS EN 60317-44:1997+A1:2010

Specifications for particular types of winding wires. Aromatic polyimide tape wrapped rectangular copper wire, class 240

BS EN 60512-7-1:2010

Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7a. Free fall (repeated)

BS EN 60512-9-5:2010

Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9e. Current loading, cyclic

BS EN 60601-2-28:2010

Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis

BS EN 60601-2-43:2010

Medical electrical equipment. Particular requirements for basic safety and essential performance of X-ray equipment for interventional procedures

BS EN 60695-1-10:2010

Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. General guidelines

BS EN 60728-1-1:2010

Cable networks for television signals, sound signals and interactive services. RF cabling for two way home networks

BS EN 60728-13:2010

Cable networks for television signals, sound signals and interactive services. Optical systems for broadcast signal transmissions

BS EN 60730-1:2000+A2:2008

Automatic electrical controls for household and similar use. General requirements

BS EN 60891:2010

Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics

BS EN 61231:2010

International lamp coding system (ILCOS)

BS EN 61360-1:2010

Standard data elements types with associated classification scheme for electric items. Definitions. Principles and methods

BS EN 61391-2:2010

Ultrasonics. Pulse-echo scanners. Measurement of maximum depth of penetration and local dynamic range

BS EN 61482-1-1:2009

Live working. Protective clothing against the thermal hazards of an electric arc. Test methods. Method 1. Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing

BS EN ISO 11204:2009

Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections

BS EN ISO 11363-1:2010

Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Specifications

BS EN ISO 11363-2:2010

Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Inspection gauges

BS EN ISO 1211:2010

Milk. Determination of fat content. Gravimetric method (Reference method)

BS EN ISO 18286:2010

Hot-rolled stainless steel plates. Tolerances on dimensions and shape

BS IEC 60605-6:2007

Equipment reliability testing. Tests for the validity and estimation of the constant failure rate and constant failure intensity

BS IEC 62465:2010

Nuclear power plants. Instrumentation and control important to safety. Management of ageing of electrical cabling systems

BS IEC 62523:2010

Radiation protection instrumentation. Cargo/vehicle radiographic inspection system

BS ISO 13041-2:2008

Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with a vertical workholding spindle

BS ISO 13655:2009

Graphic technology. Spectral measurement and colorimetric computation for graphic arts images

BS ISO 18334:2010

Pallets for materials handling. Quality of assembly of new wooden pallets

BS ISO 28640:2010

Random variate generation methods

BS ISO 29481-1:2010

Building information modelling. Information delivery manual. Methodology and format

BS ISO 5630-5:2008

Paper and board. Accelerated ageing. Exposure to elevated temperature at 100 $0DC

BS ISO 5631-1:2009

Paper and board. Determination of colour by diffuse reflectance. Indoor daylight conditions (C/2$0D)

BS ISO 5631-3:2008

Paper and board. Determination of colour by diffuse reflectance. Indoor illumination conditions (D50/2$0D)

BS ISO 8664:2005+A1:2010

Tyres for agricultural tractors and machines. Code-designated and service-description marked radial drive-wheel tyres

BS ISO 8759-2:1998

Agricultural wheeled tractors. Front-mounted equipment. Stationary equipment connection

BS ISO 8897:2010

Oil of juniper berry (Juniperus communis L.)

BS ISO 9523:2008

Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods

BS EN 62077:2010

Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification

BS EN 62149-4:2010

Fibre optic active components and devices. Performance standards. 1300 nm fibre optic transceivers for Gigabit Ethernet application

BS EN 62415:2010

Semiconductor devices. Constant current electromigration test

BS EN 62416:2010

Semiconductor devices. Hot carrier test on MOS transistors

BS EN 62616:2010

Maritime navigation and radiocommunication equipment and systems. Bridge navigational watch alarm system (BNWAS)

BS EN 710:1997+A1:2010

Safety of machinery. Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment

BS EN 9120:2010

Quality management systems. Requirements for aviation, space and defence distributors

BS EN ISO 10993-1:October 2009

Biological evaluation of medical devices. Evaluation and testing within a risk management process

BS EN ISO 10993-9:December 2009

Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products

BS EN ISO 11200:2009

Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

BS ISO/IEC 24744:2007+A1:2010

Software Engineering. Metamodel for Development Methodologies

BS 5733:2010

General requirements for electrical accessories. Specification

BS 8418:2010

Installation and remote monitoring of detector-activated CCTV systems. Code of practice

BS 8423:2010

Fireguards for fires and heating appliances for domestic use. Specification

BS EN 14081-2:2010

Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing

BS EN 14351-1:2006+A1:2010

Windows and doors. Product standard, performance characteristics. Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

BS EN 384:2010

Structural timber. Determination of characteristic values of mechanical properties and density

BS EN 4115:2010

Aerospace series. Cushion, rubber for clamps. Dimensions, masses

BS EN 50491-3:2009

General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). Electrical safety requirements

BS EN 60300-3-15:2009

Dependability management. Application guide. Engineering of system dependability

BS EN 60318-4:2010

Electroacoustics. Simulators of human head and ear. Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts

BS EN 61076-2-107:2010

Connectors for electronic equipment. Product requirements. Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking

BS EN 61549:2003+A2:2010

Miscellaneous lamps

BS EN 62343-3-1:2010

Dynamic modules. Performance specification templates. Dynamic channel equalizers

BS EN 894-4:2010

Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Location and arrangement of displays and control actuators

BS EN ISO 11130:2010

Corrosion of metals and alloys. Alternate immersion test in salt solution

BS EN ISO 15653:2010

Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds

BS EN ISO 17264:2009

Intelligent transport systems. Automatic vehicle and equipment identification. Interfaces

BS ISO 10681-2:2010

Road vehicles. Communication on FlexRay. Communication layer services

BS ISO 10872:2010

Water quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)

BS ISO 11795:1997+A1:2010

Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Method of measuring tyre rolling circumference for agricultural tractor drive wheels

BS ISO 12151-1:2010

Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-3 O-ring face seal ends

BS ISO 12151-3:2010

Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends

BS ISO 12315:2010

Aluminium oxide primarily used for production of aluminium. Method for calculating the Al$d2O$d3 content of smelter-grade alumina

BS ISO 18632:2010

Alloyed steel. Determination of manganese. Potentiometric and visual titration method

BS ISO 19012-2:2009

Optics and photonics. Designation of microscope objectives. Chromatic correction

BS ISO 26462:2010

Milk. Determination of lactose content. Enzymatic method using difference in pH

BS ISO 4190-1:2010

Lift (Elevator) installation. Class I, II, III and VI lifts

BS ISO 7867-2:2005+A1:2010

Tyres and rims (metric series) for agricultural tractors and machines. Service description and load ratings

BS 8530:2010

Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification

BS EN 1034-1:2000+A1:2010

Safety of machinery. Safety requirements for the design and construction of paper-making and finishing machines. Common requirements

BS EN 12267:2003+A1:2010

Food processing machinery. Circular saw machines. Safety and hygiene requirements

BS EN 12268:2003+A1:2010

Food processing machinery. Band saw machines. Safety and hygiene requirements

BS EN 12753:2005+A1:2010

Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements

BS EN 12921-1:2005+A1:2010

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Common safety requirements

BS EN 131-2:2010

Ladders. Requirements, testing, marking

BS EN 13208:2003+A1:2010

Food processing machinery. Vegetable peelers. Safety and hygiene requirements

BS EN 13859-1:2010

Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing

BS EN 1678:1998+A1:2010

Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements

BS EN 1816:2010

Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing

BS EN 1817:2010

Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings

BS EN 257:2010

Mechanical thermostats for gas-burning appliances

BS EN 50124-1:2001+A2:2005

Railway applications. Insulation coordination. Basic requirements. Clearances and creepage distances for all electrical and electronic equipment

BS EN 50491-5-1:2010

General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements, conditions and test set-up

BS EN 50491-5-2:2010

General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in residential, commercial and light industry environment

BS EN 50491-5-3:2010

General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in industry environment

BS EN 60335-2-24:2010

Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

BS EN 60335-2-75:2004+A1:2005

Household and similar electrical appliances. Safety. Particular requirements for commercial dispensing appliances and vending machines

BS EN 60601-1-11:2010

Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

BS IEC 60747-1:2006+A1:2010

Semiconductor devices. General

BS ISO 10681-1:2010

Road vehicles. Communication on FlexRay. General information and use case definition

BS ISO 10710:2010

Water quality. Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne

BS ISO 10932:2010

Milk and milk products. Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)

BS ISO 11001-2:1993

Agricultural wheeled tractors and implements. Three-point hitched couplers. A-frame coupler

BS ISO 11639:2010

Aerospace. Part numbering for hose assemblies

BS ISO 1222:2010

Photography. Tripod connections

BS ISO 13399-1:2006+A1:2010

Cutting tool data representation and exchange. Overview, fundamental principles and general information model

BS ISO 16192:2010

Space systems. Experience gained in space projects (Lessons learned). Principles and guidelines

BS ISO 17853:2010

Wear of implant materials. Polymer and metal wear particles. Isolation and characterization

BS ISO 18192-2:2010

Implants for surgery. Wear of total intervertebral spinal disc prostheses. Nucleus replacements

BS ISO 2962:2010

Cheese and processed cheese products. Determination of total phosphorus content. Molecular absorption spectrometric method

BS ISO 5546:2010

Caseins and caseinates. Determination of pH (Reference method)

BS ISO 5597:2010

Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

BS ISO 5721:1989

Tractors for agriculture. Operator's field of vision

BS ISO 6091:2010

Dried milk. Determination of titratable acidity (Reference method)

BS ISO 6732:2010

Milk and milk products. Determination of iron content. Spectrometric method (Reference method)

BS ISO 690:2010

Information and documentation. Guidelines for bibliographic references and citations to information resources

BS ISO 8216-1:2010

Petroleum products. Fuels (class F) classification. Categories of marine fuels

BS ISO 8217:2010

Petroleum products. Fuels (class F). Specifications of marine fuels

BS EN 61907:2010

Communication network dependability engineering

BS EN 61937-11:2010

Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. MPEG-4 AAC and its extensions in LATM/LOAS

BS EN 9104-003:2010

Aerospace series. Quality management systems. Requirements for aerospace quality management system (AQMS) auditor training and qualification

BS EN ISO 179-1:2010

Plastics. Determination of Charpy impact properties. Non-instrumented impact test

BS EN ISO 21258:2010

Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method. Non-dispersive infrared method

BS EN ISO 21549-8:2010

Health informatics. Patient healthcard data. Links

BS EN ISO 286-2:2010

Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts

BS EN ISO 4787:2010

Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use

BS EN ISO 7599:2010

Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium

BS EN ISO 9444-2:2010

Continuously hot-rolled stainless steel. Tolerances on dimensions and form. Wide strip and sheet/plate

BS ISO/IEC 9798-3:1998+A1:2010

Information technology. Security techniques. Entity authentication. Mechanisms using digital signature techniques

CGA P-41-2010

LOCATING BULK STORAGE SYSTEMS IN COURTS - FIRST EDITION

CGA G-16-2010

ARSINE - FIRST EDITION

CGA G-14-2010

NITROGEN TRIFLUORIDE - SECOND EDITION

CGA G-5.4-2010

STANDARD FOR HYDROGEN PIPING SYSTEMS AT USER LOCATIONS - FOURTH EDITION

CGA P-42 -2010

Recommended Hose Management Practice For Compressed Gas Transfer Hoses

CGA S-1.2-2009

Pressure Relief device Standards - Part 2 - Portable Containers For Compressed Gases - Ninth Edition

CSA C310-09

Distribution class polymeric cutouts (includes update #1)

CSA PLUS 4013-10

Technical Guide : Development, interpretation and use of rainfall intensity-duration-frequency (IDF) information: Guideline for Canadian water resources practitioners

CSA B140.2.1-10

Atomizing-type oil burners

CSA S448.1-10

Repair of reinforced concrete in buildings and parking structures

CAN/CSA-C22.2 NO. 60745-2-15-10

Hand-held motor operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (Bi-national standard, with UL 60745-2-15)

CSA C22.2 NO. 139-10

Electrically operated valves

CSA C22.2 No. 0.5-1982 (R2008)

Threaded Conduit Entries

CSA C22.2 No. 0.2-93 (R2008)

Insulation Coordination - General Requirements

CSA C22.2 No. 0.1-M1985 (R2008)

General Requirements for Double-Insulated Equipment

CSA C22.2 No. 0.12-M1985 (R2007)

Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less

CAN/CSA C22.2 No. 0-M91 (R2006)

General Requirements - Canadian Electrical Code, Part II

IEC 60050-212 Ed. 2.0 b:2010

"International Electrotechnical Vocabulary - Part 212: Electrical insulating solids, liquids and gases "

IEC 60050-447 Ed. 1.0 b:2010

International Electrotechnical Vocabulary - Part 447: Measuring relays

IEC 60050-732 Ed. 1.0 b:2010

International Electrotechnical Vocabulary - Part 732: Computer network technology

IEC/TS 61994-4-4 Ed. 2.0 en:2010

Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices

IEC 62508 Ed. 1.0 b:2010

Guidance on human aspects of dependability

IEC 60695-1-11 Ed. 1.0 b:2010

Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment

IEC 60695-7-1 Ed. 3.0 b:2010

Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance

IEC 62463 Ed. 1.0 b:2010

Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of illicit items

IEC 62523 Ed. 1.0 b:2010

Radiation protection instrumentation - Cargo/vehicle radiographic inspection system

IEC 62533 Ed. 1.0 b:2010

Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material

IEC 62534 Ed. 1.0 b:2010

Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material

IEC 62642-1 Ed. 1.0 b:2010

Alarm systems - Intrusion and hold-up systems - Part 1: System requirements

IEC/TR 62061-1 Ed. 1.0 b:2010

Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery

IEC 61391-2 Ed. 1.0 b:2010

Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range

IEC 61788-8 Ed. 2.0 en:2010

Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method

IEC 62479 Ed. 1.0 b:2010

Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)

IEC 60546-2 Ed. 2.0 b:2010

Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing

IEC 61784-3 Ed. 2.0 en:2010

Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions

IEC 61784-3-1 Ed. 2.0 en:2010

Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1

IEC 61784-3-12 Ed. 1.0 en:2010

Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12

IEC 61784-3-13 Ed. 1.0 en:2010

Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13

IEC 61784-3-14 Ed. 1.0 en:2010

Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14

IEC 61784-3-2 Ed. 2.0 en:2010

Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2

IEC 61784-3-3 Ed. 2.0 en:2010

Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3

IEC 61784-3-6 Ed. 2.0 en:2010

Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6

IEC 61784-3-8 Ed. 1.0 en:2010

Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8

IEC 60462 Ed. 2.0 en:2010

Nuclear instrumentation - Photomultiplier tubes for scintillation counting - Test procedures

IEC 60737 Ed. 2.0 b:2010

Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods

IEC 61400-24 Ed. 1.0 en:2010

Wind turbines - Part 24: Lightning protection

IEC 60127-2 Amd.2 Ed. 2.0 b:2010

Amendment 2 - Miniature fuses - Part 2: Cartridge fuse-links

IEC 60317-15 Ed. 3.1 b:2010

"Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180"

IEC 60317-42 Ed. 1.1 b:2010

"Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200"

IEC 60317-43 Ed. 1.1 b:2010

"Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240"

IEC 60317-44 Ed. 1.1 b:2010

"Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240"

IEC 60684-3-116 Ed. 3.0 b:2010

"Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose"

IEC 61347-1 Amd.1 Ed. 2.0 b:2010

Amendment 1 - Lamp controlgear - Part 1: General and safety requirements

IEC 61558-2-20 Ed. 2.0 b:2010

"Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors"

IEC 61558-2-3 Ed. 2.0 b:2010

"Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners "

IEC 61558-2-5 Ed. 2.0 b:2010

"Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units"

IEC 61558-2-8 Ed. 2.0 b:2010

"Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes"

IEC 61558-2-9 Ed. 2.0 b:2010

"Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps"

IEC 61788-14 Ed. 1.0 en:2010

Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices

IEC 62317-2 Ed. 1.0 b:2010

"Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications"

IEC 62329-3-100 Ed. 1.0 b:2010

"Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions"

IEC 62329-3-101 Ed. 1.0 b:2010

"Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements

IEC 62329-3-102 Ed. 1.0 b:2010

"Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performanc

IEC 62485-2 Ed. 1.0 b:2010

Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries

IEC/TR 60887 Ed. 3.0 b:2010

Glass bulb designation system for lamps

IEC/TR 62271-302 Ed. 1.0 b:2010

High-voltage switchgear and controlgear - Part 302: Alternating current circuit-breakers with intentionally non-simultaneous pole operation

IEC 60539-2 Amd.1 Ed. 1.0 b:2010

Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors

IEC 60539-2 Ed. 1.0 b:2003

Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors

IEC 60603-7-71 Ed. 1.0 b:2010

"Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz"

CISPR 16-1-1 Amd.1 Ed. 3.0 b:2010

Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

CISPR 16-2-3 Amd.1 Ed. 3.0 b:2010

Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR/TR 18-1 Ed. 2.0 en:2010

Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomena

CISPR/TR 18-2 Ed. 2.0 en:2010

Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits

CISPR/TR 18-3 Ed. 2.0 en:2010

Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise

IEC 60268-4 Ed. 4.0 en:2010

Sound system equipment - Part 4: Microphones

IEC 60728-11 Ed. 3.0 en:2010

"Cable networks for television signals, sound signals and interactive services - Part 11: Safety "

IEC 60794-3-11 Ed. 2.0 en:2010

"Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables "

IEC 61156-2-1 Ed. 3.0 en:2010

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification

IEC 61300-3-35 Ed. 1.0 en Cor.1:2010

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection

IEC 61746-2 Ed. 1.0 en:2010

Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres

IEC 61935-2 Ed. 3.0 b:2010

Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards

IEC 61968-11 Ed. 1.0 en:2010

Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution

IEC 62209-2 Ed. 1.0 b Cor.1:2010

"Corrigendum 1 - Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless commu

IEC 62368-1 Ed. 1.0 en Cor.1:2010

"Corrigendum 1 - Audio/video, information and communication technology equipment - Part 1: Safety requirements"

IEC 62537 Ed. 1.0 en:2010

Interface for loudspeakers with digital input signals based on IEC 60958

IEC/PAS 61156-1-4 Ed. 1.0 en:2010

Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Conductor heating of bundled data grade cables for limited power transmission based on IEEE

IEC/TR 62283 Ed. 2.0 en:2010

Optical fibres - Guidance for nuclear radiation tests

IEC/TR 62627-02 Ed. 1.0 en:2010

Fibre optic interconnecting devices and passive components - Part 02: Report of round robin test results on SC plug style fixed attenuators

IEC/TS 62351-7 Ed. 1.0 en:2010

Power systems management and associated information exchange - Data and communications security - Part 7: Network and system management (NSM) data object models

IEC 62590 Ed. 1.0 b:2010

Railway applications - Fixed installations - Electronic power converters for substations

IEC 61162-3 Amd.1 Ed. 1.0 en:2010

Amendment 1 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument network

IEEE C63.15-2010

American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment

IEEE 802.3ba-2010

IEEE Standard for Information technology -Telecommunications and information exchange between systems - Local and metropolitan area networks-Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and P

IEST-RP-CC001.5 (2010)

HEPA and ULPA Filters

IEST-RP-CC021.3 (2010)

Testing HEPA and ULPA Filter Media

IEST-RP-CC034.3 (2010)

HEPA and ULPA Filter Leak Tests

INCITS/ISO/IEC 24762-20082009

Information technology - Security techniques - Guidelines for information and communications technology disaster recovery services

INCITS 461-2010

Information Technology - Fibre Channel - Switch Fabric - 5 (FC-SW-5),

INCITS 462-2010

Information Technology -Fibre Channel - Backbone - 5 (FC-BB-5

INCITS 463-2010

Information Technology - Fibre Channel - Generic Services - 6 (FC-GS-6)

INCITS 457-2010

Information Technology - Serial Attached SCSI - 2 (SAS-2)

Icedu-IHB09

AV Installation Handbook: The Best Practices for Quality Audiovisual Systems, Second Edition

ICedu-AVBP05

Audiovisual Best Practices:The Design and Integration Process for the AV and Construction Industries

ICedu-AVSG08

AV Setup Guide for Events, Meetings, Conferences, and Classrooms

Icedu-Basics03

The Basics of Audio and Visual Systems Design: Revised Edition

ICedu-AVSG_SPAN08

Guía de configuración audiovisual para eventos, reuniones, conferencias y salas de clase

ISO 2575:2010

Road vehicles - Symbols for controls, indicators and tell-tales

ISO 18115-1:2010

Surface chemical analysis - Vocabulary - Part 1: General terms and terms used in spectroscopy

ISO 18115-2:2010

Surface chemical analysis - Vocabulary - Part 2: Terms used in scanning-probe microscopy

ISO 29383:2010

Terminology policies - Development and implementation

ISO 639-4:2010

Codes for the representation of names of languages - Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines

ISO 14813-5:2010

Intelligent transport systems - Reference model architecture(s) for the ITS sector - Part 5: Requirements for architecture description in ITS standards

ISO/FDIS 26000

Guidance on social responsibility

ISO 24534-1:2010

Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 1: Architecture

ISO 24534-2:2010

Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 2: Operational requirements

ISO 24534-3:2010

Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 3: Vehicle data

ISO 24534-4:2010

Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques

ISO/TR 12845:2010

Selected illustrations of fractional factorial screening experiments

ISO 19250:2010

Water quality - Detection of Salmonella spp.

ISO/TR 11360:2010

Nanotechnologies - Methodology for the classification and categorization of nanomaterials

ISO 8637:2010

Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators

ISO 8638:2010

Cardiovascular implants and extracorporeal systems - Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters

ISO 13960:2010

Cardiovascular implants and extracorporeal systems - Plasmafilters

ISO 11990-2:2010

Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs

ISO 2631-4/Amd1:2010

Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems - Amendment 1

ISO 2631-1/Amd1:2010

Evaluation of human exposure to whole-body vibration - Part 1: General requirements - Amendment 1

ISO 21338:2010

Water quality - Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test)

ISO 25140:2010

Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)

ISO/DIS 19011

Guidelines for quality and/or environmental management systems auditing

ISO 113:2010

Rolling bearings - Plummer block housings - Boundary dimensions

ISO 8443:2010

Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions

ISO/TR 27507:2010

Plain bearings - Recommendations for automotive crankshaft bearing environments

ISO 3210:2010

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution

ISO 6581:2010

Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings

ISO 5610-1:2010

Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and determination of dimensions

ISO 5610-2:2010

Tool holders with rectangular shank for indexable inserts - Part 2: Style A

ISO 5610-3:2010

Tool holders with rectangular shank for indexable inserts - Part 3: Style B

ISO 5610-4:2010

Tool holders with rectangular shank for indexable inserts - Part 4: Style D

ISO 5610-5:2010

Tool holders with rectangular shank for indexable inserts - Part 5: Style F

ISO 5610-6:2010

Tool holders with rectangular shank for indexable inserts - Part 6: Style G

ISO 5610-7:2010

Tool holders with rectangular shank for indexable inserts - Part 7: Style J

ISO 5610-8:2010

Tool holders with rectangular shank for indexable inserts - Part 8: Style K

ISO 5610-9:2010

Tool holders with rectangular shank for indexable inserts - Part 9: Style L

ISO 5610-10:2010

Tool holders with rectangular shank for indexable inserts - Part 10: Style N

ISO 5610-11:2010

Tool holders with rectangular shank for indexable inserts - Part 11: Style R

ISO 5610-12:2010

Tool holders with rectangular shank for indexable inserts - Part 12: Style S

ISO 5610-13:2010

Tool holders with rectangular shank for indexable inserts - Part 13: Style T

ISO 5610-14:2010

Tool holders with rectangular shank for indexable inserts - Part 14: Style H

ISO 5610-15:2010

Tool holders with rectangular shank for indexable inserts - Part 15: Style V

ISO/TS 13584-35:2010

Industrial automation systems and integration - Parts library - Part 35: Implementation resources: Spreadsheet interface for parts library

ISO 11745:2010

Brazing for aerospace applications - Qualification test for brazers and brazing operators - Brazing of metallic components

ISO 10649-3:2010

Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers

ISO 10649-4:2010

Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers

ISO 10649-1:2010

Cutter arbors with parallel key and tenon drive - Part 1: General dimensions

ISO 10649-2:2010

Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface

ISO 8993:2010

Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method

ISO 26802:2010

Nuclear facilities - Criteria for the design and the operation of containment and ventilation systems for nuclear reactors

ISO 10276:2010

Nuclear energy - Fuel technology - Trunnions for packages used to transport radioactive material

ISO 10244:2010

Document management - Business process baselining and analysis

ISO 15930-7:2010

Graphic technology - Prepress digital data exchange using PDF - Part 7: Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6

ISO 15930-8:2010

Graphic technology - Prepress digital data exchange using PDF - Part 8: Partial exchange of printing data using PDF 1.6 (PDF/X-5)

ISO 15143-1:2010

Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 1: System architecture

ISO 15143-2:2010

Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 2: Data dictionary

ISO/TS 27527:2010

Health informatics - Provider identification

ISO 25297-1:2010

Optics and photonics - Electronic exchange of optical data - Part 1: NODIF information model

ISO 12029:2010

Document management - Machine-readable paper forms - Optimal design for user friendliness and electronic document management systems (EDMS)

ISO 22810:2010

Horology - Water-resistant watches

ISO 4107:2010

Commercial vehicles - Wheel-hub attachment dimensions

ISO/TS 19713-1:2010

Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 1: Fractional efficiency testing with fine particles (0,3 m to 5 m optical diameter)

ISO/TS 19713-2:2010

Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 2: Fractional efficiency testing with coarse particles (5 m to 40 m optical diameter)

ISO 27955:2010

Road vehicles - Securing of cargo in passenger cars, station wagons and multi-purpose vehicles - Requirements and test methods

ISO/PAS 13613:2010

Ships and marine technology - Maintenance and testing to reduce losses in critical systems for propulsion

ISO 22538-6:2010

Space systems - Oxygen safety - Part 6: Facility planning and implementation

ISO 11231:2010

Space systems - Probabilistic risk assessment (PRA)

ISO 15856:2010

Space systems - Space environment - Simulation guidelines for radiation exposure of non-metallic materials

ISO 105-E05:2010

Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid

ISO 14237:2010

Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials

ISO 17331/Amd1:2010

Amendment 1 to ISO 17331

ISO 4701/Cor1:2010

Iron ores - Determination of size distribution by sieving - Corrigendum 1

ISO 7270-1/Amd1:2010

Amendment 1 to ISO 7270-1

ISO 2781/Amd1:2010

Rubber, vulcanized - Determination of density - Amendment 1: Precision data

ISO 813:2010

Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 degree peel method

ISO 11476:2010

Paper and board - Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)

ISO 3039:2010

Corrugated fibreboard - Determination of grammage of the component papers after separation

ISO 10845-1:2010

Construction procurement - Part 1: Processes, methods and procedures

ISO 20152-1:2010

Timber structures - Bond performance of adhesives - Part 1: Basic requirements

ISO 10848-4:2010

Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 4: Application to junctions with at least one heavy element

ISO 13822:2010

Bases for design of structures - Assessment of existing structures

ISO 22390:2010

Timber structures - Laminated veneer lumber - Structural properties

ISO/IEC 23000-9/Amd2:2010

- Amendment 2: Harmonization on MPEG-2 TS storage

ISO/IEC 23000-12:2010

Information technology - Multimedia application format (MPEG-A) - Part 12: Interactive music application format

ISO/IEC TR 25060:2010

Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: General framework for usability-related information

ISO/IEC 10646/Amd7:2010

Mandaic, Batak, Brahmi, and other characters

JIS B 8121:2009

Terms and definitions of cogeneration systems (Foreign Standard)

JIS C 1263-1:2009

Var-hour meters -- Part 1: General measuring instrument (Foreign Standard)

JIS C 1263-2:2009

Var-hour meters -- Part 2: Measuring instruments used in transaction or certification (Foreign Standard)

JIS C 1283-1:2009

Watt-hour, var-hour and maximum demand indicators for telemetering -- Part 1: General measuring instrument (Foreign Standard)

JIS C 1283-2:2009

Watt-hour, var-hour and maximum demand indicators for telemetering -- Part 2: Measuring instruments used transaction or certification (Foreign Standard)

JIS G 3442:2010

Galvanized steel pipes for ordinary piping (Foreign Standard)

JIS G 3452:2010

Carbon steel pipes for ordinary piping (Foreign Standard)

JIS H 8602:2010

Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys (Foreign Standard)

JIS C 2814-2-3:2009

Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units (Foreign Standard)

JIS C 2814-2-4:2009

Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-4: Particular requirements for twist-on connecting devices (Foreign Standard)

JIS C 3662-1:2009

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 1: General requirements (Foreign Standard)

JIS C 3662-2:2009

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 2: Test methods (Foreign Standard)

JIS C 3662-5:2009

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 5: Flexible cables (cords) (Foreign Standard)

JIS K 2400:2010

Microscopes -- Immersion liquids for light microscopy (Foreign Standard)

JIS D 1401:2009

Electrical characteristic test methods of electric double layer capacitors for use in hybrid electric vehicles (Foreign Standard)

JIS E 7103:2006

Rolling stock -- General requirements of carbody for passenger car (Foreign Standard)

JIS R 3419:2009

Textile glass chopped strands (Foreign Standard)

JIS Z 7252:2009

Classification of chemicals based on "Globally Harmonized System of Classification and Labelling of Chemicals (GHS)" (Foreign Standard)

JIS S 6013:2009

Mechanical pencils (Foreign Standard)

NACE SP0198-2010

Control of Corrosion Under Thermal Insulation and Fireproofing Materials - A Systems Approach

NEMA TC 19-2001 (R2009)

Nonmetallic Riser U-type Guards

NFPA 1000-2011

FPA 1000: Standard for Fire Service Professional Qualifications Accreditation and Certification Systems, 2011 Edition

NFPA 1126-2011

NFPA 1126: Standard for the Use of Pyrotechnics Before a Proximate Audience, 2011 Edition

NFPA 160-2011

NFPA 160: Standard for the Use of Flame Effects Before an Audience, 2011 Edition

NFPA 307-2011

NFPA 307: Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves, 2011 Edition

NFPA 312-2011

NFPA 312: Standard for Fire Protection of Vessels During Construction, Conversion, Repair, and Lay-Up, 2011 Edition

NFPA 40-2011

NFPA 40: Standard for the Storage and Handling of Cellulose Nitrate Film, 2011 Edition

NFPA 88A-2011

NFPA 88A: Standard for Parking Structures, 2011 Edition

NFPA 1071-2011

Standard for Emergency Vehicle Technician Professional Qualifications, 2011 Edition

NFPA 1145-2011

NFPA 1145: Guide for the Use of Class A Foams in Manual Structural Fire Fighting, 2011 Edition

NFPA 73-2011

NFPA 73: Standard for Electrical Inspections for Existing Dwellings, 2011 Edition

NFPA 87-2011

NFPA 87: Recommended Practice for Fluid Heaters, 2011 Edition

NFPA 30B-2011

NFPA 30B: Code for the Manufacture and Storage of Aerosol Products, 2011 Edition

ANSI CGATS TR 011-2002 (R2010)

Graphic technology - Package development workflow - Design concept through approved production file

ONORM EN ISO 4254-6:2010

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

ONORM EN ISO 10058-3:2010

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20

OVE/ONORM EN 60947-5-1:2010

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2003 + A1:2009) (english version)

OVE/ONORM EN 62386-101:2010

Digital addressable lighting interface - Part 101: General requirements - System (IEC 62386-101:2009) (english version)

OVE/ONORM EN 61000-4-14:2010

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999 + A1:2001 + A2:2009) (english version)

OVE/ONORM EN 60311:2010

Electric irons for household or similar use - Methods for measuring performance (IEC 60311:2002 + A1:2005 + A2:2009) (english version)

OVE/ONORM EN 60064:2010

Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements (IEC 60064:1993 + A2:2002 + A3:2005 + A4:2007 + A5:2009, all modified) (english version)

OVE/ONORM EN 50177:2010

Stationary electrostatic application equipment for ignitable coating powders - Safety requirements (english version)

OVE/ONORM EN 50176:2010

Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements (english version)

OVE/ONORM EN 61558-2-6:2010

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

OVE/ONORM EN 62386-102:2010

Digital addressable lighting interface - Part 102: General requirements - Control gear (IEC 62386-102:2009) (english version)

OVE/ONORM EN 60947-2:2010

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:2006 + A1:2009) (english version)

OVE/ONORM EN 55012:2010

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers (IEC/CISPR 12:2007 + A1:2009) (english version)

OVE/ONORM EN 60255-26:2010

Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements (IEC 60255-26:2008) (english version)

OVE/ONORM EN 61869-1:2010

Instrument transformers - Part 1: General requirements (IEC 61869-1:2007, modified) (english version)

OVE/ONORM EN 61000-4-13:2010

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002 + A1:2009) (english version)

OVE/ONORM EN 50524:2010

Data sheet and name plate for photovoltaic inverters (english version)

OVE/ONORM EN 61000-4-34:2010

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005 + A1:2009 + Cor.:2

OVE/ONORM EN 62386-202:2010

Digital addressable lighting interface - Part 202: Particular requirements for control gears - Self-contained emergency lighting (device type 1) (IEC 62386-202:2009) (english version)

OVE/ONORM EN 61606-1:2010

Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 1: General (IEC 61606-1:2009) (english version)

OVE/ONORM EN 61988-5:2010

Plasma display panels - Part 5: Generic specification (IEC 61988-5:2009) (english version)

OVE/ONORM EN 62501:2010

Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 62501:2009) (english version)

OVE/ONORM EN 62386-201:2010

Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) (IEC 62386-201:2009) (english version)

OVE/ONORM EN 81346-2:2010

Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes (IEC 81346-2:2009) (english version)

OVE/ONORM EN 62343-5-1:2010

Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time measurement (IEC 62343-5-1:2009) (english version)

ONORM EN ISO 10058-2:2010

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 10058-2:2008)

OVE/ONORM EN 50523-2:2010

Household appliances interworking - Part 2: Data structures (english version)

OVE/ONORM EN 60300-3-15:2010

Dependability management - Part 3-15: Application guide - Engineering of system dependability (IEC 60300-3-15:2009) (english version)

OVE/ONORM EN 61987-10:2010

Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals (IEC 61987-10:2009)

OVE/ONORM EN 50523-1:2010

Household appliances interworking - Part 1: Functional specification (english version)

ONORM EN ISO 15350:2010

Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000)

ONORM EN 12520:2010

Furniture - Strength, durability and safety - Requirements for domestic seating

ONORM EN 14879-6:2010

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers

OVE/ONORM EN 61988-2-3:2010

Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation (IEC 61988-2-3:2009) (english version)

OVE/ONORM EN 61606-2:2010

Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2: Consumer use (IEC 61606-2:2009) (english version)

OVE/ONORM EN 50085-2-4:2010

Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts (english version)

OVE/ONORM EN 55016-1-4:2010

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances (IEC/CISPR 16-1-4:2007 + A1:2007 + A2:2008) (english version)

OVE/ONORM EN 62386-204:2010

Digital addressable lighting interface - Part 204: Particular requirements for control gears - Low voltage halogen lamps (device type 3) (IEC 62386-204:2009) (english version)

OVE/ONORM EN 62386-203:2010

Digital addressable lighting interface - Part 203: Particular requirements for control gears - Discharge lamps (excluding fluorescent lamps) (device type 2) (IEC 62386-203:2009) (english version)

ONORM EN ISO 439:2010

Steel and iron - Determination of total silicon content - Gravimetric method (ISO 439:1994)

OVE/ONORM EN 61988-3-2:2010

Plasma display panels - Part 3-2: Interfaces - Electrical interface (IEC 61988-3-2:2009) (english version)

OVE/ONORM EN 62341-5:2010

Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods (IEC 62341-5:2009) (english version)

OVE/ONORM EN 62341-1-1:2010

Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications (IEC 62341-1-1:2009) (english version)

OVE/ONORM EN 60068-2-14:2010

Environmental testing - Part 2-14: Tests - Test N: Change of temperature (IEC 60068-2-14:2009) (english version)

ONORM EN 15695-2:2010

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

ONORM EN ISO 7625:2010

Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2006)

ONORM EN ISO 13473-5:2010

Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)

ONORM EN ISO 7540:2010

Ground paprika (Capsicum annuum L.) - Specification (ISO 7540:2006)

ONORM EN ISO 17234-1:2010

Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 1: Determination of certain aromatic amines derived from azo colorants (ISO 17234-1:2010)

ONORM EN 14701-4:2010

Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges

ONORM EN 15612:2010

Railway applications - Braking - Brake pipe accelerator valve

ONORM EN ISO 10058-1:2010

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 10058-1:2008)

ONORM EN ISO 10399:2010

Sensory analysis - Methodology - Duo-trio test (ISO 10399:2004)

ONORM EN 15835:2010

Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection

ONORM EN ISO 14015:2010

Environmental management - Environmental assessment of sites and organizations (EASO) (ISO 14015:2001)

OVE/ONORM EN 50173-1:2010

Information technology - Generic cabling systems - Part 1: General requirements (english version)

OVE/ONORM EN 62148-11:2010

Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules (IEC 62148-11:2009) (english version)

OVE/ONORM EN 62223:2010

Insulators - Insulators Glossary of terms and definitions (IEC 62223:2009) (english version)

ONORM EN ISO 14025:2010

Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)

ONORM EN ISO 14004:2010

Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004)

ONORM EN 15751:2010

Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method

ONORM EN 15798:2010

Products used for the treatment of swimming pool water - Filter media

ONORM EN 15796:2010

Chemicals used for treatment of swimming pool water - Calcium hypochlorite

ONORM EN 15799:2010

Products used for treatment of swimming pool water - Powdered activated carbon

ONORM EN 15841:2010

Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

ONORM EN ISO 15351:2010

Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)

ONORM EN 15842:2010

Foodstuffs - Detection of food allergens - General considerations and validation of methods

ONORM EN ISO 20565-3:2010

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-

OVE/ONORM EN 81346-1:2010

Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules (IEC 81346-1:2009) (english version)

OVE/ONORM EN 62149-2:2010

Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices (IEC 62149-2:2009) (english version)

OVE/ONORM EN 60745-2-21:2010

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, modified) (english version)

OVE/ONORM EN 62433-2:2010

EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE) (IEC 62433-2:2008) (english version)

OVE/ONORM EN 62546:2010

High Definition (HD) recording link guidelines (IEC 62546:2009)

ONORM EN 12663-2:2010

Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons

ONORM EN ISO 7541:2010

Ground (powdered) paprika - Determination of total natural colouring matter content (ISO 7541:1989)

ONORM EN 15829:2010

Foodstuffs - Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs - HPLC method with immunoaffinity column cleanup and fluorescence detection

ONORM EN ISO 17678:2010

Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO 17678:2010)

ONORM EN ISO 20565-2:2010

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 20565-2:2008)

ONORM EN ISO 20565-1:2010

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 20565-1:2008)

OVE/ONORM EN ISO/IEC 17050-1:2010

Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15)

ONORM EN ISO 15752:2010

Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety (ISO 15752:2010)

ONORM EN ISO 3923-1:2010

Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)

ONORM EN ISO 3738-1:2010

Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)

ONORM EN ISO 3369:2010

Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)

ONORM EN ISO 26203-1:2010

Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2010)

OVE/ONORM EN 60626-2:2010

Combined flexible materials for electrical insulation - Part 2: Methods of test (IEC 60626-2:2009) (english version)

OVE/ONORM EN 60893-3-7:2010

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003 + A1

OVE/ONORM EN 60255-151:2010

Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection (IEC 60255-151:2009) (english version)

OVE/ONORM EN 50520:2010

Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations (english version)

OVE/ONORM EN 61003-2:2010

Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 2: Guidance for inspection and routine testing (IEC 61003-2:2009) (english version)

OVE/ONORM EN 60300-3-11:2010

Dependability management - Part 3-11: Application guide - Reliability centred maintenance (IEC 60300-3-11:2009) (english version)

OVE/ONORM EN 60384-1:2010

Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2008 + corrigendum 2008) (english version)

OVE/ONORM EN 60603-7:2010

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2008) (english version)

OVE/ONORM EN 50065-1:2010

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances (english version)

OVE/ONORM EN 61202-1:2010

Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2009) (english version)

OVE/ONORM EN 50397-2:2010

Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria (english version)

OVE/ONORM EN 60893-3-6:2010

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003 + A1:

OVE/ONORM EN 60112:2010

Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009) (english version)

OVE/ONORM EN 50119:2010

Railway applications - Fixed installations - Electric traction overhead contact lines (english version)

OVE/ONORM EN 60269-4:2010

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC 60269-4:2009) (english version)

OVE/ONORM EN 60335-2-103:2010

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2002) (english version)

OVE/ONORM EN 61770:2010

Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets (IEC 61770:2008) (english version)

OVE/ONORM EN 62386-205:2010

Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) (IEC 62386-205:2009) (english version)

OVE/ONORM EN 60947-7-3:2010

Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks (IEC 60947-7-3:2009) (english version)

OVE/ONORM EN 61535:2010

Installation couplers intended for permanent connection in fixed installations (IEC 61535:2009) (english version)

OVE/ONORM EN 55011:2010

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (IEC/CISPR 11:2009, modified) (english version)

OVE/ONORM EN 60601-2-54:2010

Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (IEC 60601-2-54:2009) (english version)

OVE/ONORM EN 50345:2010

Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines (english version)

OVE/ONORM EN 60603-7-1:2010

Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors (IEC 60603-7-1:2009) (english version)

OVE/ONORM EN 61280-2-3:2010

Fibre optic communication subsystem test procedures - Part 2-3: Digital systems - Jitter and wander measurements (IEC 61280-2-3:2009) (english version)

OVE/ONORM EN 60601-2-41:2010

Medical electrical equipment - Part 2-41: Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis (IEC 60601-2-41:2009) (english version)

OVE/ONORM EN 62386-206:2010

Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5) (IEC 62386-206:2009) (english version)

OVE/ONORM EN 62386-207:2010

Digital addressable lighting interface - Part 207: Particular requirements for control gears - LED modules (device type 6) (IEC 62386-207:2009) (english version)

OVE/ONORM EN 62386-208:2010

Digital addressable lighting interface - Part 208: Particular requirements for control gear - Switching function (device type 7) (IEC 62386-208:2009) (english version)

OVE/ONORM EN 61753-086-2:2010

Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1 490/1 550 nm downstream 1 310 nm upstream WWDM devices for category C - Controlled environment (IEC 61753-086-2:200

OVE/ONORM EN 60191-6:2010

Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages (IEC 60191-6:2009) (english version)

OVE/ONORM EN 60738-1:2010

Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification (IEC 60738-1:2006 + A1:2009) (english version)

ONORM EN 16002:2010

Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

ONORM EN ISO 11085:2010

Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method (ISO 11085:2008)

ONORM EN 15859:2010

Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures

ONORM EN 1854:2010

Pressure sensing devices for gas burners and gas burning appliances

ONORM EN ISO 14063:2010

Environmental management - Environmental communication - Guidelines and examples (ISO 14063:2006)

ONORM EN ISO 14050:2010

Environmental management - Vocabulary (ISO 14050:2009)

ONORM EN 13702:2010

Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method

ONORM EN 1906:2010

Building hardware - Lever handles and knob furniture - Requirements and test methods

ONORM EN 10025-6:2010

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

ONORM EN 10208-1:2010

Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A

ONORM EN 10208-2:2010

Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B

ONORM EN 10225:2010

Weldable structural steels for fixed offshore structures - Technical delivery conditions

ONORM EN 1097-2:2010

Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation

ONORM EN 12288:2010

Industrial valves - Copper alloy gate valves

ONORM EN 125:2010

Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices

ONORM EN 12568:2010

Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts

ONORM EN 1278:2010

Chemicals used for treatment of water intended for human consumption - Ozone

ONORM EN 13000:2010

Cranes - Mobile cranes

ONORM EN 13035-3:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines (consolidated version)

ONORM EN 13035-4:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

ONORM EN 13036-1:2010

Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique

ONORM EN 13121-3:2010

GRP tanks and vessels for use above ground - Part 3: Design and workmanship

ONORM EN 13177:2010

Chemicals used for treatment of water intended for human consumption - Methanol

ONORM EN 13367:2010

Ceramic machines - Safety - Transfer platforms and cars (consolidated version)

ONORM EN 13398:2010

Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen

ONORM EN 13415:2010

Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites

ONORM EN 1366-4:2010

Fire resistance tests for service installations - Part 4: Linear joint seals

ONORM EN 14022:2010

Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives

ONORM EN 14224:2010

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability

ONORM EN 14294:2010

Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes

ONORM EN 14351-1:2010

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

ONORM EN 14492-2:2010

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

ONORM EN 1493:2010

Vehicle lifts

ONORM EN 15338:2010

Hardware for furniture - Strength and durability of extension elements and their components

ONORM EN 15619:2010

Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures

ONORM EN 196-8:2010

Methods of testing cement - Part 8: Heat of hydration - Solution method

ONORM EN 1993-1-11:2010

Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components (consolidated version)

ONORM EN 1993-4-1:2010

Eurocode 3 - Design of steel structures - Part 4-1: Silos (consolidated version)

ONORM EN 1993-4-2:2010

Eurocode 3 - Design of steel structures - Part 4-2: Tanks (consolidated version)

ONORM EN 1993-4-3:2010

Eurocode 3 - Design of steel structures - Part 4-3: Pipelines (consolidated version)

ONORM EN 421:2010

Protective gloves against ionizing radiation and radioactive contamination

ONORM EN 520:2010

Gypsum plasterboards - Definitions, requirements and test methods

ONORM EN 930:2010

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

ONORM EN 931:2010

Footwear manufacturing machines - Lasting machines - Safety requirements

ONORM EN ISO 105-C06:2010

Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010)

ONORM EN ISO 105-E01:2010

Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2010)

ONORM EN ISO 105-E03:2010

Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010)

ONORM EN ISO 105-E07:2010

Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010)

ONORM EN ISO 105-E12:2010

Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010)

ONORM EN ISO 11339:2010

Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)

ONORM EN ISO 12956:2010

Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010)

ONORM EN ISO 14698-2:2010

Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003 + Cor.1:2004) (consolidated version)

ONORM EN ISO 15798:2010

Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2010)

ONORM EN ISO 2739:2010

Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)

ONORM EN ISO 2871-1:2010

Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)

ONORM EN ISO 2871-2:2010

Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

ONORM EN ISO 3386-1:2010

Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials (ISO 3386-1:1986 + Amd 1:2010) (consolidated version)

ONORM EN ISO 6179:2010

Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2010)

ONORM EN ISO 8253-2:2010

Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009)

ONORM EN ISO 8536-2:2010

Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010)

OVE/ONORM EN 61850-6:2010

Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs (IEC 61850-6:2009)

SAE AMS 1425D-1990 (SAE AMS1425D-1990)

Deicing Fluid, Aircraft, Ethylene Glycol Base ( Cancelled: May 2010 )

SAE AMS 2175A-2010 (SAE AMS2175A-2010)

Castings, Classification and Inspection of

SAE AMS 3660D-2010 (SAE AMS3660D-2010)

Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered

SAE AIR 744C-2010 (SAE AIR744C-2010)

Aerospace Auxiliary Power Sources

SAE J 647-2010 (SAE J647-2010)

Automotive TransmissionsSchematic Diagrams

SAE J 567-2010 (SAE J567-2010)

Lamp Source Retention System

SAE J 551-1-2010 (SAE J551-1-2010)

Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m) and Machines (16.6 Hz to 18 GHz)

SAE J 517-2010 (SAE J517-2010)

Hydraulic Hose

SAE J 444-2010 (SAE J444-2010)

Cast Shot and Grit Size Specifications for Peening and Cleaning

SAE J 443-2010 (SAE J443-2010)

Procedures for Using Standard Shot Peening Test Strip

SAE J 371-2010 (SAE J371-2010)

Drain, Fill, and Level Plugs for Off-Road, Self-Propelled Work Machines

SAE J 361-2010 (SAE J361-2010)

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim

SAE J 2666-2010 (SAE J2666-2010)

Hose Gauge Evaluation Procedure ( Reaffirmed: Jun 2010 )

SAE J 2612-2010 (SAE J2612-2010)

Internal Combustion Engines -- Piston Vocabulary

SAE J 2551-2010 (SAE J2551-2010)

Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications

SAE J 2403-2010 (SAE J2403-2010)

Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

SAE J 2286-2010 (SAE J2286-2010)

Vendor Component Program Data File Interface for OEM Assembly Operations

SAE J 2040-2010 (SAE J2040-2010)

Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width

SAE J 1939-31-2010 (SAE J1939-31-2010)

Network Layer

SAE J 1810-2010 (SAE J1810-2010)

Electrical Indicating System Specification

SAE J 1711-2010 (SAE J1711-2010)

Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles

SAE J 1614-2010 (SAE J1614-2010)

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines

SAE J 1513-2010 (SAE J1513-2010)

External Automatic Slack Adjuster Performance Requirements ( Reaffirmed: May 2010 )

SAE J 1432-2010 (SAE J1432-2010)

Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width

SAE J 1383-2010 (SAE J1383-2010)

Performance Requirements for Motor Vehicle Headlamps

SAE J 131-2010 (SAE J131-2010)

Motorcycle Turn Signal Lamps ( Reaffirmed: Jun 2010 )

SAE J 1268-2010 (SAE J1268-2010)

Hardenability Bands for Carbon and Alloy H Steels

SAE J 119-2010 (SAE J119-2010)

Fiberboard Crease Bending Test

SAE AMS 2486E-2010 (SAE AMS2486E-2010)

Conversion Coating of Titanium Alloys Fluoride-Phosphate Type

SAE AMS 2580-2010 (SAE AMS2580-2010)

Shot Peening, Ultrasonically Activated

SAE AMS 2585-2010 (SAE AMS2585-2010)

Shot Peening Media, Ultrasonically Activated

SAE AMS 2759/2F-2010 (SAE AMS2759/2F-2010)

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS 2759/7B-2010 (SAE AMS2759/7B-2010)

Carburizing and Heat Treatment of Carburizing Grade Steel Parts

SAE AMS 3205M-2010 (SAE AMS3205M-2010)

Synthetic Rubber Low-Temperature Resistant, 45-55

SAE AMS 3320H-2010 (SAE AMS3320H-2010)

Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60-80

SAE AMS 3328B-2010 (SAE AMS3328B-2010)

Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, 35-45

SAE AMS 3329B-2010 (SAE AMS3329B-2010)

Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, High Strength, 45-55

SAE AMS 3330B-2010 (SAE AMS3330B-2010)

Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, 45-55

SAE AMS 3331B-2010 (SAE AMS3331B-2010)

Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, 65-75

SAE AMS 3657E-2010 (SAE AMS3657E-2010)

Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered

SAE AMS 3658E-2010 (SAE AMS3658E-2010)

Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress- Relieved Radiographically Inspected

SAE AMS 3659E-2010 (SAE AMS3659E-2010)

Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved

SAE AMS 3668D-2010 (SAE AMS3668D-2010)

Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered

SAE AMS 3669F-2010 (SAE AMS3669F-2010)

Polytetrafluoroethylene (PTFE) Sheet, Molded, Premium Grade, As Sintered

SAE AMS 4458-2010 (SAE AMS4458-2010)

Aluminum Alloy, Plate (2.7 Cu 1.8 Li 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked and Artificially Aged

SAE AMS 4922C-2010 (SAE AMS4922C-2010)

Titanium Alloy, Seamless Hydraulic Tubing, 15V 3.0Cr 3.0Al 3.0Sn Cold Worked and Precipitation Heat Treated

SAE AMS 4942F-2010 (SAE AMS4942F-2010)

Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength

SAE AMS 5590F-2010 (SAE AMS5590F-2010)

Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni 19Cr 3.0Mo 5.1Cb (Nb) 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted 1950mDF (1066mDC) Solution Heat Treated ( Reaffirmed: Apr 2006 )

SAE AMS 5652H-2010 (SAE AMS5652H-2010)

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 25Cr 20Ni 2Si (SAE 30314) Solution Heat Treated

SAE AMS 5694J-2010 (SAE AMS5694J-2010)

Steel, Corrosion and Heat Resistant, Welding Wire 27Cr 21.5Ni

SAE AMS 5716J-2010 (SAE AMS5716J-2010)

Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, and Rings 44Fe 18.5Cr 35.5Ni 1.1Si Solution Heat Treated

SAE AMS 5763D-2010 (SAE AMS5763D-2010)

Steel, Corrosion Resistant Bars, Forgings, and Tubing, and Rings 15Cr 6.5Ni 0.75Mo 0.50Cb (Nb) 1.5Cu, Solution Heat Treated

SAE AMS 5803F-2010 (SAE AMS5803F-2010)

Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr 4.8Ni 0.22Cb (Nb) 3.6Cu Consumable Electrode or Vacuum Induction Melted

SAE AMS 5840E-2010 (SAE AMS5840E-2010)

Steel, Corrosion and Moderate Heat Resistant, Welding Wire 13Cr 8.0Ni 2.3Mo 1.1Al Vacuum Melted

SAE AMS 5854B-2010 (SAE AMS5854B-2010)

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings, 61Ni 20.5Cr 8.5Mo 3.4Cb(Nb) 1.3Ti 5.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated

SAE AMS 5922A-2010 (SAE AMS5922A-2010)

Steel, Corrosion-Resistant, Bars, and Forgings 10Cr 5.5Ni 14Co 2Mo 1W (0.19 - 0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed

SAE AMS 6264K-2010 (SAE AMS6264K-2010)

Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2Cr 3.2Ni 0.12Mo (0.14-0.20C) (SAE 9317)

SAE AMS 6270P-2010 (SAE AMS6270P-2010)

Steel, Bars, Forgings, and Tubing 0.50Cr 0.55Ni 0.20Mo (0.13-0.18C) (SAE 8615)

SAE AMS 6272L-2010 (SAE AMS6272L-2010)

Steel Bars, Forgings, and Tubing 0.50Cr 0.55Ni 0.20Mo (0.15 0.20C) (SAE 8617)

SAE AMS 6292H-2010 (SAE AMS6292H-2010)

Steel Bars and Forgings, Carburizing 1.8Ni 0.25Mo (0.15-0.20C) (SAE 4617)

SAE AMS 6294H-2010 (SAE AMS6294H-2010)

Steel Bars and Forgings, Carburizing 1.8Ni 0.25Mo (0.17 0.22C) (SAE 4620)

SAE AMS 6324H-2010 (SAE AMS6324H-2010)

Steel Bars, Forgings, and Tubing, 0.65Cr 0.70Ni 0.25Mo (0.38-0.43C) (SAE 8740 Modified)

SAE AMS 6340A-2010 (SAE AMS6340A-2010)

Steel Bars, Forgings, and Tubing 0.88Cr 1.8Ni 0.42Mo 0.08V (0.28 0.33C) (4330 Mod) Consumable Electrode Vacuum Remelted

SAE AMS 6382N-2010 (SAE AMS6382N-2010)

Steel Bars, Forgings and Rings, 0.95Cr 0.20Mo (0.38-0.43C) (SAE 4140) Annealed

SAE AMS 6412M-2010 (SAE AMS6412M-2010)

Steel, Bars and Forgings 0.80Cr 1.8Ni 0.25Mo (0.35-0.40C) (4337)

SAE AMS 6428J-2010 (SAE AMS6428J-2010)

Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.35Mo 0.20V (0.32-0.38C) (4335 Modi

SAE AMS 6429G-2010 (SAE AMS6429G-2010)

Steel Bars, Forgings, Tubing, and Rings 0.78Cr 1.8Ni 0.35Mo 0.20V (0.33-0.38C) Consumable Electrode Vacuum Melted

SAE AMS 6433F-2010 (SAE AMS6433F-2010)

Steel, Sheet, Strip and Plate 0.75Mn 0.78Cr 1.8Ni 0.35Mo 0.20V (0.33-0.38C)(4335 Mod)

SAE AMS 6470M-2010 (SAE AMS6470M-2010)

Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr 0.35Mo 1.13Al (0.38-0.43C) (135 Mod)

SAE AMS 6471G-2010 (SAE AMS6471G-2010)

Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr 0.35Mo 1.13Al (0.38-0.43C)(135 Mod) Consumable Electrode Vacuum Melted

SAE AMS 6472E-2010 (SAE AMS6472E-2010)

Steel Bars and Forgings, Nitriding 1.6Cr 0.35Mo 1.1Al (0.38-0.43C)(135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength

SAE AMS 6491D-2010 (SAE AMS6491D-2010)

Steel Bars, Forgings, And Tubing 4.1Cr 4.2Mo 1.0V(0.80-0.85C)(M-50) Premium Aircraft-Quality For Bearing Applications, Double Vacuum Melted

SAE AMS 6519C-2010 (SAE AMS6519C-2010)

Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni 3.0Mo 1.4Ti 0.10Al Premium Aircraft-Quality Double Vacuum Melted, Annealed

SAE AMS 7270L-2010 (SAE AMS7270L-2010)

Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber, Fuel Resistant 65-75

SAE AMS 7271J-2010 (SAE AMS7271J-2010)

Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60-70

SAE AIR 38B-2010 (SAE AIR38B-2010)

Guide for the Design of Threaded Screw or Stud Type Electrical Equipment Terminations

SAE AIR 4566A-2010 (SAE AIR4566A-2010)

Crashworthy Landing Gear Design

SAE AIR 5005A-2010 (SAE AIR5005A-2010)

Aerospace - Commercial Aircraft Hydraulic Systems

SAE AIR 825/14-2010 (SAE AIR825/14-2010)

Basic Aircraft Oxygen Systems Design

SAE ARP 1178B-2010 (SAE ARP1178B-2010)

Aircraft Evacuation Signal System

SAE ARP 1270B-2010 (SAE ARP1270B-2010)

Aircraft Cabin Pressurization Control Criteria

SAE ARP 4101/5A-2010 (SAE ARP4101/5A-2010)

Aircraft Circuit Breaker and Fuse Arrangement

SAE ARP 5149A-2010 (SAE ARP5149A-2010)

Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground

SAE ARP 5305-2010 (SAE ARP5305-2010)

Structural Design and Construction Considerations for Enclosed Turbofan/Turbojet Engine Test Cells

SAE ARP 5481A-2010 (SAE ARP5481A-2010)

Recommended Wheel Tie Bolt Preload Procedure

SAE ARP 5526B-2010 (SAE ARP5526B-2010)

Aircraft Seat Design Guidance and Clarifications

SAE ARP 5583A-2010 (SAE ARP5583A-2010)

Guide to Certification of Aircraft in a High-Intensity Radiated Field (HIRF) Environment

SAE ARP 5777-2010 (SAE ARP5777-2010)

Maintenance and Inspection Procedures for Acme Screw Assemblies

SAE ARP 5879-2010 (SAE ARP5879-2010)

AerospaceTest Methodology for Electrohydrostatic Actuators

SAE ARP 6137-2010 (SAE ARP6137-2010)

Tire Pressure Monitoring systems (TPMS) for Aircraft

SAE ARP 743C-2001 (SAE ARP743C-2001)

Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Particle Count Method ( Cancelled: May 2010 )

SAE ARP 9137-2010 (SAE ARP9137-2010)

Guidance for the Application of AQAP 2110 within a 9100 Quality Management System

SAE ARP 987B-2010 (SAE ARP987B-2010)

The Control of Excess Humidity in Avionics Cooling

SAE AS 1001G-2010 (SAE AS1001G-2010)

Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Side, Flareless

SAE AS 1002G-2010 (SAE AS1002G-2010)

Fitting, Tee, Standard and Reducer, Bulkhead and Internal Port on Run, Flareless Tube

SAE AS 1003F-2010 (SAE AS1003F-2010)

Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless

SAE AS 1004F-2010 (SAE AS1004F-2010)

Fitting, Elbow, 90mD, Standard and Reducer, Flareless

SAE AS 1005G-2010 (SAE AS1005G-2010)

Fitting, Tee, Standard and Reducer, Flareless

SAE AS 1006F-2010 (SAE AS1006F-2010)

Fitting, Cross, Standard and Reducer, Flareless

SAE AS 1007G-2010 (SAE AS1007G-2010)

Fitting, Union, Standard and Reducer, Bulkhead, Flareless

SAE AS 1008G-2010 (SAE AS1008G-2010)

Fitting, Elbow, 90mD, Standard and Reducer, Bulkhead, Flareless

SAE AS 1009G-2010 (SAE AS1009G-2010)

Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flareless

SAE AS 1010F-2010 (SAE AS1010F-2010)

Fitting, Elbow, 45mD, Standard and Reducer, Bulkhead, Flareless

SAE AS 1032F-2010 (SAE AS1032F-2010)

Fitting, Tee, Standard and Reducer, Bulkhead and Internal Port on Run, Flared

SAE AS 1034F-2010 (SAE AS1034F-2010)

Fitting, Elbow, 90mD, Standard and Reducer, Flared

SAE AS 33391A-2010 (SAE AS33391A-2010)

Plate, Mounting, Plastic for Use with MS3367 Plastic Tiedown Straps

SAE AS 33401A-2010 (SAE AS33401A-2010)

Bulkhead Bracket for Use with MS3367 Plastic Tiedown Straps

SAE AS 33411A-2010 (SAE AS33411A-2010)

Bracket, Mounting, Plastic for Use with MS3367 Plastic Tiedown Straps

SAE AS 33699A-2010 (SAE AS33699A-2010)

Insert Arrangements, Electric Connector, Shell Size 7

SAE AS 33700A-2010 (SAE AS33700A-2010)

Insert Arrangements, Electric Connector, Shell Size 12

SAE AS 33701A-2010 (SAE AS33701A-2010)

Insert Arrangements, Electric Connector, Shell Size 19

SAE AS 33702A-2010 (SAE AS33702A-2010)

Insert Arrangements, Electric Connector, Shell Size 27

SAE AS 33703A-2010 (SAE AS33703A-2010)

Insert Arrangements, Electric Connector, Shell Size 37

SAE AS 14101D-2010 (SAE AS14101D-2010)

Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Narrow, Grooved Race, -65 to +325mDF

SAE AS 14102D-2010 (SAE AS14102D-2010)

Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Wide, Chamfered Race, -65 to +325mDF

SAE AS 14103E-2010 (SAE AS14103E-2010)

Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Wide, Grooved Race, -65 to +325mDF

SAE AS 14104D-2010 (SAE AS14104D-2010)

Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Narrow, Chamfered Race, -65 to +325mDF

SAE AS 143C-1966 (SAE AS143C-1966)

Heaters, Aircraft, Internal Combustion Heat Exchanger Type ( Cancelled: Dec 1992 )

SAE AS 1895/12D-2010 (SAE AS1895/12D-2010)

Flange End, Male, Type I, Standard Profile, Design Standard

SAE AS 1895/13D-2010 (SAE AS1895/13D-2010)

Flange End, Female, Type I, Standard Profile, Design Standard

SAE AS 1895/14D-2010 (SAE AS1895/14D-2010)

Flange End, Male, Type II, Low Profile, Design Standard

SAE AS 1895/15E-2010 (SAE AS1895/15E-2010)

Flange End, Female, Type II, Low Profile Design Standard

SAE AS 23190A-2010 (SAE AS23190A-2010)

Wiring, Positioning and Support Accessories

SAE AS 3319D-2010 (SAE AS3319D-2010)

Stud - Straight, Ring Locked, CRES AMS 5731, .190-24UNJC X .190-32UNJF

SAE AS 3320D-2010 (SAE AS3320D-2010)

Stud - Straight, Ring Locked, CRES AMS 5731, .250-20UNJC X .250-28UNJF

SAE AS 3321D-2010 (SAE AS3321D-2010)

Stud - Straight, Ring Locked, CRES AMS 5731, .3125-18UNJFC X .3125-24UNJF

SAE AS 3322D-2010 (SAE AS3322D-2010)

Stud - Straight, Ring Locked, CRES AMS 5731, .375-16UNJC X .375-24UNJF

SAE AS 35769A-2010 (SAE AS35769A-2010)

Gasket, Metallic, Encased, Annular, Copper

SAE AS 3619-2010 (SAE AS3619-2010)

Cable, Safety, Ferrule, Elongated Nickel Alloy, UNS N06600

SAE AS 3650A-2010 (SAE AS3650A-2010)

Bolt, Machine - Double Hex Head, Reduced Shank, UNS N07718 - 185 KSI

SAE AS 39029/106A-2010 (SAE AS39029/106A-2010)

Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-DTL-38999 Series I, III, IV, MIL-DTL-29600 and AS29600 Series A Connectors)

SAE AS 39029/107A-2010 (SAE AS39029/107A-2010)

Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-DTL-38999 Series I, III, IV, MIL-DTL-29600 and AS29600 Series A Connectors)

SAE AS 39029/59A-2010 (SAE AS39029/59A-2010)

Contacts, electrical connector, socket, crimp removable, shielded, size 8 (for MIL-DTL-38999 series I, III, and IV connectors)

SAE AS 5162B-2010 (SAE AS5162B-2010)

Fitting, Connector, Multiple Fluid Pressure Line, 90mD

SAE AS 5234-2010 (SAE AS5234-2010)

Nut, Coupling Flareless

SAE AS 5756/7-2010 (SAE AS5756/7-2010)

Cable, Low Inductance, 270 Volt DC

SAE AS 5768/1A-2010 (SAE AS5768/1A-2010)

Tool, Stripper, Manually Actuated, Electrical Insulation, Round Wire, Size 10 to 30

SAE AS 5768/2A-2010 (SAE AS5768/2A-2010)

Tool, Stripper, Manually Actuated, Small Grip, Electrical Insulation, Round Wire, Size 16 to 30

SAE AS 7472A-2010 (SAE AS7472A-2010)

Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded

SAE AS 81820/1C-2010 (SAE AS81820/1C-2010)

Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Race, -65mD to +325mDF

SAE AS 81820/2C-2010 (SAE AS81820/2C-2010)

Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Chamfered Race, -65mD to +325mDF

SAE AS 81820/3C-2010 (SAE AS81820/3C-2010)

Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Race, -65mD to +325mDF

SAE AS 81820/4C-2010 (SAE AS81820/4C-2010)

Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Chamfered Race, -65mD to +325mDF

SAE AS 85049/143-2010 (SAE AS85049/143-2010)

Connector Accessories, Backshell, Strain Relief, Category 4C, for AS81714, Size 22, 20 and 16 Terminal Junction Blocks

SAE AS 85049/81A-2010 (SAE AS85049/81A-2010)

Connector Accessories, Electrical, Seal Plug, Size 10, Category 7 (MIL-DTL-38999 Connectors)

SAE AS 9115-2010 (SAE AS9115-2010)

Quality Management SystemsRequirements for Aviation, Space and Defense OrganizationsDeliverable Software (Supplement to 9100)

SAE MA 5405A-2010 (SAE MA5405A-2010)

Splices, Fiber Optics, for Aerospace Inter-Connection Systems

SAE J 2881-2010 (SAE J2881-2010)

Measurement of Aerodynamic Performance for Mass-Produced Cars and Light-Duty Trucks

SAE J 2909-2010 (SAE J2909-2010)

Light Vehicle Dry Stopping Distance

SAE J 2663-2010 (SAE J2663-2010)

Test Procedure to Measure Permeation of Elastomeric Hose or Tube by Weight Loss

SAE J 2728-2010 (SAE J2728-2010)

Heavy Vehicle Event Data Records (HVEDR) Standard - Tier 1

SAE J 2828-2010 (SAE J2828-2010)

Off-Road Tire Fire Handling Guidelines

SAE J 2846-2010 (SAE J2846-2010)

Laboratory Measurement of the Acoustical Performance of Body Cavity Filler Materials

SAE J 2863-2010 (SAE J2863-2010)

Automotive Trailer Tow Connector

SAE J 2917-2010 (SAE J2917-2010)

Occupant Restraint and Equipment Mounting IntegrityFrontal Impact System-Level Ambulance Patient Compartment

SAE AIR 5567A-2010 (SAE AIR5567A-2010)

Test Method for Catalytic Carbon Brake Disk Oxidation

SAE ARP 6068-2010 (SAE ARP6068-2010)

Gas Turbine Engine Test Facility Vibration Measurement

SAE AS 7456B-2010 (SAE AS7456B-2010)

Studs, Steel, Low Alloy Heat Treated, Roll Threaded

SAE J 2192-2010 (SAE J2192-2010)

Recommended Testing Methods for Physical Protection of Wiring Harnesses

SAE J 1248-2010 (SAE J1248-2010)

Performance Requirements for Parking Stability of Motorcycles ( Reaffirmed: Jun 2010 )

SAE J 1774-2010 (SAE J1774-2010)

Design Guidelines for Fiberboard Materials ( Reaffirmed: Jun 2010 )

SAE J 2752-2010 (SAE J2752-2010)

Personnel Protection-Compact Tool Carriers

SAE J 2788-2010 (SAE J2788-2010)

HFC-134a (R-134a) Recovery/Recycling Equipment and Recovery/Recycling/Recharging for Mobile Air-Conditioning Systems

SAE J 2847-1-2010 (SAE J2847-1-2010)

Communication between Plug-in Vehicles and the Utility Grid

SAE J 2890-2010 (SAE J2890-2010)

Hydraulic Fluid Power-Accelerated Method for Determining the Wear Characteristics of a Hydraulic Component due to Contaminants

SAE MS 1001-2010 (SAE MS1001-2010)

Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems -- Specification

SAE MS 1005-2010 (SAE MS1005-2010)

Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic FluidsSpecification

SAE AMS 1427B-1981 (SAE AMS1427B-1981)

Deicing/Anti-Icing Fluid, Aircraft, Propylene- Glycol Base ( Cancelled: Jul 2010 )

SAE AMS 2768C-2010 (SAE AMS2768C-2010)

Heat Treatment of Magnesium Alloy Castings

SAE AMS 3337E-2010 (SAE AMS3337E-2010)

Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 65-75

SAE AMS 3656G-2010 (SAE AMS3656G-2010)

Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered

SAE AMS 4989B-2010 (SAE AMS4989B-2010)

Titanium Alloy Sheet, Strip, and Plate 3Al 2.5V Solution Heat Treated

SAE AMS 5410B-2010 (SAE AMS5410B-2010)

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 61Ni 16Cr 8.5Co 1.8Mo 2.6W 0.85Cb 3.4Ti 1.8Ta 3.4A1 0.010B 0.05Zr Vacuum Melted, Vacuum Cast As Cast, or Solution Treated, or Solution and Precipitation Hardened

SAE AMS 5935-2010 (SAE AMS5935-2010)

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr 10Ni 2Mo 0.9Al 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable

SAE AMS 5938-2010 (SAE AMS5938-2010)

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr 12Ni 2Mo 1.45Al - 1.15Ti Vacumm Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable

SAE AMS 6477B-2010 (SAE AMS6477B-2010)

Steel Bars, Forgings, and Tubing, 0.80Cr (0.90 1.03C), For Bearing Applications

SAE AMS 6499-2010 (SAE AMS6499-2010)

Steel, Bars, Forgings, and Tubing 2.7Si 0.85Cr 1.8Ni 0.4Mo 0.2V (0.37 - 0.44C) Double Vacuum Melted

SAE AMS 6512F-2010 (SAE AMS6512F-2010)

Steel, Bars, Forgings, Tubing, and Rings 18Ni 7.8Co 4.9Mo 0.40Ti 0.10Al Consumable Electrode Vacuum Melted, Annealed

SAE AMS 6514G-2010 (SAE AMS6514G-2010)

Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni 9.0Co 4.9Mo 0.65Ti 0.10Al Consumable Electrode Vacuum Melted, Annealed

SAE AMS 6945A-2010 (SAE AMS6945A-2010)

Titanium Alloy, single Melt, Sheet, Strip, and Plate 6A1 - 4V Annealed

SAE AMS-S-4383A-2010 (SAE AMS-S-4383A-2010)

Sealing Compound, Topcoat, Fuel Tank, Buna-N Type

SAE AIR 1594C-2010 (SAE AIR1594C-2010)

Plain Bearing Selection for Landing Gear Applications

SAE ARP 5257B-2010 (SAE ARP5257B-2010)

Tire Overspeed Landing Test

SAE AS 3486D-2010 (SAE AS3486D-2010)

Nut, Self-Locking, Extended Double Hexagon, Reduced Flange, Dry Film Lube, UNS S66286, Class: 160 KSI/800 mDF

SAE AS 3563C-2010 (SAE AS3563C-2010)

Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Extended Wrench Pad 160 ksi, 800 mDF, UNS S66286

SAE AS 3564C-2010 (SAE AS3564C-2010)

Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Counterbored 160 ksi, 800 mDF, UNS S66286

SAE AS 50881D-2010 (SAE AS50881D-2010)

Wiring Aerospace Vehicle

SAE AS 5551A-2010 (SAE AS5551A-2010)

Fitting Assembly - 24Degree Cone Flareless per AS5827, 5080 psi, Port Connection Port Preparation, Installation and Removal of AS5550 and AS5865

SAE AS 6062-2010 (SAE AS6062-2010)

JAUS Mission Spooling Service Set

SAE AIR 5919A-2010 (SAE AIR5919A-2010)

Alternatives to Cadmium Plating

SAE AS 1007H-2010 (SAE AS1007H-2010)

Fitting, Union, Standard and Reducer, Bulkhead, Flareless

SAE AS 5750A-2010 (SAE AS5750A-2010)

Loss Budget Specification for Fiber Optic Links

SAE AS 39029/60A-2010 (SAE AS39029/60A-2010)

Contacts, electrical connector, pin, crimp removable, shielded, size 8 (for MIL-DTL-38999 series I, III, and IV connectors)

SAE AS 5000C-2010 (SAE AS5000C-2010)

Fitting, Plug-in Union, Ring Locked, 24 Degree Cone, Fluid Connection, 5080 psi (35 000 kPa), Specification for

SAE AS 5684A-2010 (SAE AS5684A-2010)

JAUS Service Interface Definition Language

SAE J 2577-2010 (SAE J2577-2010)

Heavy Duty Lamp Electrical Connector Standard

SAE J 2873-2010 (SAE J2873-2010)

Electric Drive Cooling Fan Motor Mounting

SAE J 2891-2010 (SAE J2891-2010)

Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks

SCTE 170 2010

Preparing an MDU Amplifier Extender Specification

SCTE 106 2010

DOCSIS Set-Top Gateway (DSG) Specification

SEMI C3.35-1109E

Specification for Hydrogen Chloride (HCI), 99.997% Quality

SEMI C3.6-0710

Standard for Phosphine (PH₃) in Cylinders, 99.98% Quality

SEMI D34-0710

Test Method for FPD Polarizing Films

SEMI D39-0704 (R 0710)

Specification for Markers on FPD Polarizing Films

SEMI D59-0710

3D Display Terminology

SEMI D60-0710

Test Method of Surface Scratch Resistance for FPD Polarizing Film and Its Materials

SEMI E100-1104 (R 0710)

Specification for a Reticle SMIF Pod (RSP) Used to Transport and Store 6 inch or 230 mm Reticles

SEMI E101-1104 (R 0710)

Guide for EFEM Functional Structure Model

SEMI E107-1102 (R 0710)

Specification of Electric Failure Link Data Format for Yield Management System

SEMI E117-1104 (R 0710)

Specification for Reticle Load Port

SEMI E125-0710

Specification for Equipment Self Description (EqSD)

SEMI E130-1104 (R 0710)

Specification for Prober Specific Equipment Model for 300 mm Environment (PSEM300)

SEMI E132-0310E

Specification for Equipment Client Authentication and Authorization

SEMI E134-0710

Specification for Data Collection Management

SEMI E156-0710

Mechanical Specification for 450 mm AMHS Stocker to Transport Interface

SEMI E157-0710

Specification for Module Process Tracking

SEMI E158-0710

Mechanical Specification for Fab Wafer Carrier Used to Transport and Store 450 mm Wafers (450 FOUP) and Kinematic Coupling

SEMI E23-1104 (R 0710)

Specification for Cassette Transfer Parallel I/O Interface

SEMI E28-92 (R 0710)

Guideline for Pressure Specifications of the Mass Flow Controller

SEMI E29-93 (R 0710)

Standard Terminology for the Calibration of Mass Flow Controllers and Mass Flow Meters

SEMI E30-0307E2

Generic Model for Communications and Control of Manufacturing Equipment (GEM)

SEMI E54-0710

Sensor/Actuator Network Standard

SEMI E77-1104 (R 0710)

Test Method for Calculation of Conversion Factors for a Mass Flow Controller Using Surrogate Gases

SEMI E80-0299 (R 0710)

Test Method for Determining Attitude Sensitivity of Mass Flow Controllers (Mounting Position)

SEMI E99-1104E (R 0710)

The Carrier ID Reader/Writer Functional Standard: Specification of Concepts, Behavior, and Services

SEMI F28-1103 (R 0710)

Test Method for Measuring Particle Generation from Process Panels

SEMI F30-0710

Start-Up and Verification of Purifier Performance Testing for Trace Gas Impurities and Particles at an Installation Site

SEMI F74-1103 (R 0710)

Test Method for the Performance and Evaluation of Metal Seal Designs for Use in Gas Delivery Systems

SEMI F79-0710

Guideline for Gas Compatibility with Silicon Used in Gas Distribution Components

SEMI M76-0710

Specification for Developmental 450 mm Diameter Polished Single Crystal Silicon Wafers

SEMI MF1617-0304 (R 0710)

Test Method for Measuring Surface Sodium, Aluminum, Potassium, and Iron on Silicon and EPI Substrates by Secondary Ion Mass Spectrometry

SEMI PV4-0710

Specification for Range of 5th Generation Substrate Sizes for Thin Film Photovoltaic Applications

SEMI S10-0307E

Safety Guideline for Risk Assessment and Risk Evaluation Process

SEMI S2-0310a

Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment

SEMI S22-0709b

Safety Guideline for the Electrical Design of Semiconductor Manufacturing Equipment

SEMI T12-0710

Specification for Tracing Jigs and Implements

SEMI T13-1104 (R 0710)

Specification for Device Tracking: Concepts, Behavior and Services

SEMI T20-0710

Specification for Authentication of Semiconductors and Related Products

TIP 0304-26-2010

Common curtain coating problems: causes, detection, and correction

TIP 0304-25-2010

Understanding formaldehyde management

ANSI Z80.5-2010

Ophthalmics - Requirements for Ophthalmic Frames